Abstract:Limestone is widely used as a sorbent in fluidized bed combustors. The study of limestone attrition characteristics is significant for mass balance and desulfurization efficiency. The present study investigates the sulfation and attrition behavior of limestone in a bubbling fluidized bed reactor. The product distribution and development of the product layer are analyzed by scanning electron microscopy. The experimental results show the attrition rate dropped dramatically at the initial kinetic-controlled regime of the sulfation reaction. The observations show that the distribution of the product is not uniform but primarily concentrated on the external surface of the particle. Meanwhile, the thickness of the product layer at the initial stage of the sulfation reaction reaches 0.7 mu m, which is larger than that predicted by previous investigators, and it results in a dramatic decrease in the attrition rate. As sulfation continues, the thickness of the product layer increases and reaches 1.6 mu m at the diffusion-controlled regime of the reaction, whereas the attrition rate decays to a steady state. A random pore model is also used to analyze the development of the product layer thickness by counting in the whole reaction surface, but the results show a much smaller value as a result of the lack of consideration of the unreacted core, which verifies the early pore blockage in the initial stage observed in the present study.

Distributed pore model for sulfation of calcium-based sorbent

PORE SIZE DISTRIBUTION MODEL FOR SULFATION OF CALCIUM-BASED SORBENT

Model on desulfurization characteristic of limestone particles

MICROSTRUCTURE AND SULFATION CHARACTERISTICS OF CALCIUM-BASED SORBENTS

Kinetic model for desulfurization at medium temperature using hydrated absorbent

Desulfurization Characteristic of Calcium-Based Sorbent During Activation Process.

Sulfation Diffusion Model for SO 2 Capture on the T-T Sorbent at Moderate Temperatures

Sorbent Performance under FBC Conditions -- A Thermochemical Analysis

Study on desulfurization reaction characteristic of calcium-based sorbents

Sorbent performance under FBC conditions-a thermochemical analysis

Experiments on H2S sorption by limestone in a fluidized bed gasifier

Effect of characteristic of sorbents on their sulfur capture capability at a fluidized bed condition

Study on SO2 removal of calcium sorbent mixed with pulverized coal ash

Sulfation Mechanisms of Ca-based Absorbent Modified by Metal Oxides

Comprehensive Sulfation Model Verified for T–T Sorbent Clusters During Flue Gas Desulfurization at Moderate Temperatures

Limestone Attrition and Product Layer Development During Fluidized Bed Sulfation

Experiment And Modeling Of Co(2) Capture From Flue Gases In A Fluidized Bed With Limestone And Dolomite Sorbents

DRY SO2 REMOVAL AT LOW TEMPERATURE USING CALCIUM-BASED SORBENTS

Effect of water content on desulfurization characteristic of calcium-based sorbent

A MODEL FOR THE REACTIONS OF CaS IN COAL GASIFIER CHAR IN CIRCULATING FLUIDIZED BED COMBUSTOR

FSI(furnace Sorbent Injection) Desulfurization Modeling