Abstract:Experiments were carried out in a pilot-scale entrained flow reactor (EFR) to investigate the reaction of SO3 with Ca(OH)(2) as a method of dry sorbent injection (DSI) for SO3 removal from flue gas. The results indicate that SO3 can be removed by Ca(OH)(2) with an efficiency that can reach 80%, and it was found that the molar ratio of Ca(OH)(2) to SO3 ([Ca]/[S]) and reaction temperature have a significant effect on SO3 removal efficiency. The experimental data measured inside the EFR were analyzed with a computing fluid dynamic (CFD) simulation, in which the Euler-Lagrangian frames were used for gas- and discrete-phase modeling. The CFD models were validated and applied to analyze the effects of certain parameters on SO3 removal efficiency, such as particle velocity, [Ca]/[S], temperature and residence time. It was found that the sorbent diameter has a significant influence on SO3 removal efficiency, with an obvious decrease in efficiency if the Ca(OH)(2) particle diameter increases. For example, if the sorbent diameter increases from 3 to 10 mu m, the SO3 removal efficiency at the reactor outlet will decrease from 99% to 55%. A detailed comparison and theoretical analysis indicated that external diffusion of SO3 from the gas phase to the particle surface is the rate controlling step for larger Ca(OH)(2) particles, and more attention should be paid to the competition between external diffusion and surface reaction when applying the DSI method for removing SO3 from flue gas.

DRY SO2 REMOVAL AT LOW TEMPERATURE USING CALCIUM-BASED SORBENTS

High temperature desulfurization using fine sorbent particles under boiler injection conditions

Kinetic model for desulfurization at medium temperature using hydrated absorbent

Study on desulfurization reaction characteristic of calcium-based sorbents

Experimental Study on a Novel CaO-Fe_2O_3/γ-Al_2O_3 Sorbent for SO_2 Removal

Simultaneous removal of SO2 and NOx by calcium hydroxide at low temperature: Effect of SO2 absorption on NO 2 removal

Simultaneous Removal of SO2 and NO from Flue Gas with Calcium-Based Sorbent at Low Temperature

Preparation of high-reactivity Ca-based SO<sub>2</sub> adsorbent and experimental study for simulated flue gas dry desulfurization

Calcium-Based Regenerable Sorbents for High Temperature H2s Removal

Sulfation Performance of CaO under Circulating Fluidized Bed Combustion-Like Condition

High Calcium Utilization and Gypsum Formation for Dry Desulfurization Process

Partially Sulfated Lime-Fly Ash Sorbents Activated by Water or Steam for SO2 Removal at a Medium Temperature

High Temperature Adsorption of SO2 on Mixed Oxides Derived from CaAl Hydrotalcite-Like Compounds

MICROSTRUCTURE AND SULFATION CHARACTERISTICS OF CALCIUM-BASED SORBENTS

Removal of Co2 by Cao/Mgo and Cao/Ca9al6o18 in the Presence of So2

Sulfation Diffusion Model for SO 2 Capture on the T-T Sorbent at Moderate Temperatures

Nitrogen Dioxide Reaction With Calcium Based Sorbent During Dry Flue Gas Desulfurization

SO3 Removal from Flue Gas with Ca(OH)2 in Entrained Flow Reactors

An Investigation of the Desulfurization Mechanisms by Double Circulating Fiuidized Bed-Flue Gas Suspension Desulfurization Apparatus

So3 Removal by Submicron Absorbents Synthesized Via Inhibition Method: the Product Layer Grows Like Parallel Peaks

Experimental Study on the Preparation of Desulfurizer for Low Temperature Dry Desulfurization by Digesting CaO in Urea Solution