Abstract:Experiments were carried out in a pilot-scale entrained flow reactor (EFR) to investigate the reaction of SO3 with Ca(OH)(2) as a method of dry sorbent injection (DSI) for SO3 removal from flue gas. The results indicate that SO3 can be removed by Ca(OH)(2) with an efficiency that can reach 80%, and it was found that the molar ratio of Ca(OH)(2) to SO3 ([Ca]/[S]) and reaction temperature have a significant effect on SO3 removal efficiency. The experimental data measured inside the EFR were analyzed with a computing fluid dynamic (CFD) simulation, in which the Euler-Lagrangian frames were used for gas- and discrete-phase modeling. The CFD models were validated and applied to analyze the effects of certain parameters on SO3 removal efficiency, such as particle velocity, [Ca]/[S], temperature and residence time. It was found that the sorbent diameter has a significant influence on SO3 removal efficiency, with an obvious decrease in efficiency if the Ca(OH)(2) particle diameter increases. For example, if the sorbent diameter increases from 3 to 10 mu m, the SO3 removal efficiency at the reactor outlet will decrease from 99% to 55%. A detailed comparison and theoretical analysis indicated that external diffusion of SO3 from the gas phase to the particle surface is the rate controlling step for larger Ca(OH)(2) particles, and more attention should be paid to the competition between external diffusion and surface reaction when applying the DSI method for removing SO3 from flue gas.

Sulfation Diffusion Model for SO 2 Capture on the T-T Sorbent at Moderate Temperatures

Comprehensive Sulfation Model Verified for T–T Sorbent Clusters During Flue Gas Desulfurization at Moderate Temperatures

Kinetic Model of Cao/Fly Ash Sorbent for Flue Gas Desulphurization at Moderate Temperatures

Kinetic model for desulfurization at medium temperature using hydrated absorbent

Desulfurization Characteristic of Calcium-Based Sorbent During Activation Process.

Improved sulphur capture model of T-T sorbent for eulerian simulation

Distributed pore model for sulfation of calcium-based sorbent

Modeling Of The Aqueous Ca(Oh)(2) Reaction Under Semi-Dry Fgd Condition

Experimental Study of the Sulfation and Attrition of T-Tb Sorbent at Moderate Temperatures

Effects Of The Limestone Particle Size On The Sulfation Reactivity At Low So2 Concentrations Using A Lc-Tga

PORE SIZE DISTRIBUTION MODEL FOR SULFATION OF CALCIUM-BASED SORBENT

Characterization of the sulfation reactivity of limestones with different particle size in a large-capacity TGA

FSI(furnace Sorbent Injection) Desulfurization Modeling

Feasibility Study on Simultaneous Removal of Sulfur and Trace Selenium in the MTD-FGD Reactor

Modeling of the Flue Gas Desulfurization in a CFB Riser Using the Eulerian Approach with Heterogeneous Drag Coefficient

DRY SO2 REMOVAL AT LOW TEMPERATURE USING CALCIUM-BASED SORBENTS

Numerical and Experimental Investigation of the Effects of Impinging Streams to Enhance Ca-based Sorbent Capture of SO2

SO3 Removal from Flue Gas with Ca(OH)2 in Entrained Flow Reactors

Model on desulfurization characteristic of limestone particles

A Model for Flue Gas Desulfurization with Lime Absorbent at Middle Temperature

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion