Abstract:A reactor design combining impinging streams and a circulating fluidized bed reactor (IS-CFB) was developed to improve the gas–solid mixing in fluidized beds. The Eulerian two-fluid model and a sulfation model for a CaO/fly ash sorbent were used for numerical simulations of a pilot-scale IS-CFB reactor, and the simulation results indicate that the introduction of impinging streams to a CFB reactor significantly improves the desulfurization efficiency from 89.5% to 95.1%, due to the more homogeneous radial particle volume fraction distributions and the much larger effective SO2 capture zone. The lateral gas flow in the impingement zone intensifies the gas–solid mass transfer. Effects of the bed bulk density and the impinging particle material on the desulfurization efficiency were also investigated. Experiments were conducted using two Ca-based sorbents in a small-scale IS reactor at 750°C. The experimental results show that the Ca/bio-based sorbent gives higher desulfurization efficiencies than the CaO/fly ash sorbent, for the latter which is large and dense cannot be effectively entrained by the impinging streams. A method for combining experiments and calculations is developed to estimate the gas–solid residence time in the impingement zone. It is found that the residence time is significantly influenced not only by the gas velocity but also by the solid to gas mass ratio.

Improved sulphur capture model of T-T sorbent for eulerian simulation

Sulfation Diffusion Model for SO 2 Capture on the T-T Sorbent at Moderate Temperatures

Modeling of the Flue Gas Desulfurization in a CFB Riser Using the Eulerian Approach with Heterogeneous Drag Coefficient

Comprehensive Sulfation Model Verified for T–T Sorbent Clusters During Flue Gas Desulfurization at Moderate Temperatures

Kinetic model for desulfurization at medium temperature using hydrated absorbent

Desulfurization Characteristic of Calcium-Based Sorbent During Activation Process.

Numerical and Experimental Investigation of the Effects of Impinging Streams to Enhance Ca-based Sorbent Capture of SO2

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

CFD Simulation with Enhancement Factor of Sulfur Dioxide Absorption in the Spray Scrubber

Numerical Studies for the Co2 Capture Process in A Fluidized-Bed Absorber

Experimental Investigation and Modeling of Mass Transfer Characteristics in a Double-Contact Flow Absorber

Mass Transfer and Reaction Process of the Wet Desulfurization Reactor with Falling Film by Cross-Flow Scrubbing

Simulation of Particle Erosion in Moderate Temperature Dry Flue Gas Desulfurization Reactor

Experimental Study of the Sulfation and Attrition of T-Tb Sorbent at Moderate Temperatures

Modeling on circulating fluidized bed flue gas desulfurization

Kinetic Model of Cao/Fly Ash Sorbent for Flue Gas Desulphurization at Moderate Temperatures

STUDY ON DESULFURIZATION CHARACTERISTIC IN CaO ACTIVATION REACTOR OF LIMESTONE INJECTION FGD SYSTEM Ⅰ--MATHEMATICS MODEL

A Model for Flue Gas Desulfurization with Lime Absorbent at Middle Temperature

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED

Mass transfer characteristics in double-contact-flow absorber with liquid column/screen flow type: Modeling and experiment