Abstract:Adding limestone to coal combustion reduces SO2 emissions but sometimes increases NO emissions, posing a challenge for synergistic SO2 and NO control in circulating fluidized bed (CFB) boilers. Limestone in the CFB furnace can participate in the conversion of sulfur and nitrogen compounds from coal and its devolatilized coke. This study compared the effects of limestone on SO2 and NO emission characteristics during coal/coke combustion to explore the potential for controlling both emissions. Combustion experiments were conducted in a fixed-bed reactor under different reaction parameters including Ca/S mole ratio, oxygen concentration, and temperature. Results showed that SO2 emissions decreased and NO emissions increased with increasing Ca/S mole ratio for both fuels. Comparing the emissions from fuels with and without limestone addition, a lower oxygen concentration decreased the desulfurization efficiency and the increment of NO emissions caused by limestone for both fuels. Temperature had opposite effects of limestone on coal or coke combustion. For coke, higher temperatures improved desulfurization efficiency and decreased the increment of NO emissions caused by limestone. For coal, the effects were reversed. To explain the impact of temperature, the sulfur and nitrogen migration paths affected by limestone were analyzed based on the XPS results of the fuels. Thiophene-S and N-Q became the main sulfur and nitrogen components in coke at high temperatures. The conversion of thiophene-S into SO2 is slow, and the limestone is calcined more fully during coke combustion, improving the utilization rate of limestone. N-Q tends to be converted into NH3. Further, NO is reduced by NH3 over the catalyze of CaO at low oxygen conditions. This reaction process decreases the increment of NO emissions caused by limestone.

Model on desulfurization characteristic of limestone particles

Characterization of the sulfation reactivity of limestones with different particle size in a large-capacity TGA

Effects Of The Limestone Particle Size On The Sulfation Reactivity At Low So2 Concentrations Using A Lc-Tga

Distributed pore model for sulfation of calcium-based sorbent

Desulfurization Characteristic of Calcium-Based Sorbent During Activation Process.

A Model for Flue Gas Desulfurization with Lime Absorbent at Middle Temperature

STUDY ON DESULFURIZATION CHARACTERISTIC IN CaO ACTIVATION REACTOR OF LIMESTONE INJECTION FGD SYSTEM Ⅰ--MATHEMATICS MODEL

PORE SIZE DISTRIBUTION MODEL FOR SULFATION OF CALCIUM-BASED SORBENT

Experimental study on the effect of limestone on SO2 and NO emission characteristics during coal/coke combustion

Attrition of limestone during fluidized bed calcination and sulfation

Experiments on H2S sorption by limestone in a fluidized bed gasifier

Experiment on H2S removal by limestone in fluidized bed

Kinetic model for desulfurization at medium temperature using hydrated absorbent

The Effect Of Limestone With Additive On Coal Combustion

Insights into the Desulfurization Mechanism of Low-Grade Limestone As Absorbent Induced by Particle Size

Effects of high steam partial pressure on desulfurization process of limestone

Model for Sulphur Absorption of Middle Temperature Flue Gas with Lime

Experimental Study on Calcination and Fragmentation Characteristics of Limestone in Fluidized Bed

Modeling on circulating fluidized bed flue gas desulfurization

A MODEL FOR THE REACTIONS OF CaS IN COAL GASIFIER CHAR IN CIRCULATING FLUIDIZED BED COMBUSTOR

Sulfation Diffusion Model for SO 2 Capture on the T-T Sorbent at Moderate Temperatures