Abstract:In order to make the eletrochemical real-time quantitaive PCR instrument meet the requirements of temperature characterstics in the process of PCR amplification, some optimizations in structure and material of conventional PCR chip were made to fabricate a multi-channel electrochemical real-time quantitative PCR chip. By using finite element simulation software ANSYS, temperature characteristics of the PCR chip were analyzed. According to the analysis results, insulation and thermal compensation were used to improve the thermal cycle system for electrochemical real-time quantitative PCR instrument, which was proved effective in the simulation test. Annular structure was applied to improve the consistency of temperature among every channel of the chip. Meanwhile, considering the character of the electrochemical detection, the structure of three layers, consisting of mono-crystalline silicon, aluminum and polycarbonate, was adopted to reduce the thermal hysteresis of the chip's reaction pool. Then, we simulated the temperature field of the chip based on its finite element model. Through the steady-state analysis, the thicknesses of the insulation layers and the thermal compensation temperature were determined so as to weaken the heat transfer effect between the chip and the peripheral air, which could improve the accuracy and uniformity of the chip's temperature. Furthermore, the thermal hysteresis and homoiothermy of the chip were tested in the improved thermal cyde system through transient analysis. The thermal analysis results of the chip in the improved thermal cyde system were as follows. The uniformity and accuracy errors of the temperature was less than 0.2°C. The temperature consistency error was 0°C among every channel of the chip. The ascending and cooling speeds were 4°C/s and 3°C/s, respectively. The facts indicated that the temperature characteristics of the thermal cyde system could meet the performance requirements of the PCR instrument well.

Analysis Of Thermal Cycling In Micro-Pcr Chip

Study on factors affecting thermal performance of PCR thermal cycle system by equivalent circuit

FEA for Steady-State Thermal Performance of PCR Thermal-Cycler Based on Thermoelectric Cooler

Research on thermal cycle system for real-time PCR instrument based on equivalent circuit model

Modeling and Analysis of Thermal Cycle System for Quantitative PCR Instrument

Research and verification of thermal model for PCR instrument temperature field

Thermal Design of PCR Chip Based on Natural Convection in a Micro Chamber

Design and Thermal Analysis of a Micro-Chamber PCR Integrated Chip

Research on the Temperature Characteristics of Thermal Cycle System for Electrochemical Real-time Quantitative PCR Instrument

Numerical Simulation of Micro Flow-Through Pcr Chip

Study on a Low Power and High Efficiency Micro Heater Used in Μpcr Chip

Analysis on PCR Chip With Reusable Electrodes and its Temperature Field

Simulation analysis and experimental verification of thermodynamic characteristics of integrated droplet digital PCR chip

MEMS-based Micro Chamber PCR Chip Thermal Analysis and Structural Improvement

Simulation and Design of a Self-Heating Continuous-Flow PCR Chip

Simulation of Rapid Thermal Cycle for Ultra-Fast PCR

Study on Characterization of Micro Heater Used for Micro PCR Chip

Study on Micro PCR System and Its Temperature Control Property

Study on Large Area Temperature Control System for a Low-cost PCR Chip

A Design and FEA-simulation of a Micro-PCR Chip on Polymer

A PCR Chip with Reusable Electrodes and Its Temperature Analysis