Abstract:In order to make the eletrochemical real-time quantitaive PCR instrument meet the requirements of temperature characterstics in the process of PCR amplification, some optimizations in structure and material of conventional PCR chip were made to fabricate a multi-channel electrochemical real-time quantitative PCR chip. By using finite element simulation software ANSYS, temperature characteristics of the PCR chip were analyzed. According to the analysis results, insulation and thermal compensation were used to improve the thermal cycle system for electrochemical real-time quantitative PCR instrument, which was proved effective in the simulation test. Annular structure was applied to improve the consistency of temperature among every channel of the chip. Meanwhile, considering the character of the electrochemical detection, the structure of three layers, consisting of mono-crystalline silicon, aluminum and polycarbonate, was adopted to reduce the thermal hysteresis of the chip's reaction pool. Then, we simulated the temperature field of the chip based on its finite element model. Through the steady-state analysis, the thicknesses of the insulation layers and the thermal compensation temperature were determined so as to weaken the heat transfer effect between the chip and the peripheral air, which could improve the accuracy and uniformity of the chip's temperature. Furthermore, the thermal hysteresis and homoiothermy of the chip were tested in the improved thermal cyde system through transient analysis. The thermal analysis results of the chip in the improved thermal cyde system were as follows. The uniformity and accuracy errors of the temperature was less than 0.2°C. The temperature consistency error was 0°C among every channel of the chip. The ascending and cooling speeds were 4°C/s and 3°C/s, respectively. The facts indicated that the temperature characteristics of the thermal cyde system could meet the performance requirements of the PCR instrument well.

Study on Micro PCR System and Its Temperature Control Property

Study on factors affecting thermal performance of PCR thermal cycle system by equivalent circuit

Research and verification of thermal model for PCR instrument temperature field

Research on thermal cycle system for real-time PCR instrument based on equivalent circuit model

Study on Characterization of Micro Heater Used for Micro PCR Chip

A Microchip-Based PCR Device Using Flexible Printed Circuit Technology

Design and Thermal Analysis of a Micro-Chamber PCR Integrated Chip

Study on Large Area Temperature Control System for a Low-cost PCR Chip

Simulation and experimental study of temprature lag time for Polymerase Chain Reaction instrument

Simulation and experimental study of PCR chip based on silicon

Design and Fabrication of Temperature Control PCR-CE microfliudic Chip

Temperature-controlled System of PCR Chips

Open Thermal Control System for Stable Polymerase Chain Reaction on a Digital Microfluidic Chip

The Design And Manufacture Of Functional Micro-Stationary Pcr Chip

STUDY ON METAL MEMBRANE TEMPERATURE SENSOR AND MICROHEATER FOR PCR CHIP

Review of temperature control technology of PCR microfluidic devices

Temperature-controlled Technology for Space Domain PCR Chip/microdevice

Research on the Temperature Characteristics of Thermal Cycle System for Electrochemical Real-time Quantitative PCR Instrument

Study on a Low Power and High Efficiency Micro Heater Used in Μpcr Chip

MEMS-based Micro Chamber PCR Chip Thermal Analysis and Structural Improvement

Labview-based Microfluidic PCR PID Temperature Control System