Abstract:In order to make the eletrochemical real-time quantitaive PCR instrument meet the requirements of temperature characterstics in the process of PCR amplification, some optimizations in structure and material of conventional PCR chip were made to fabricate a multi-channel electrochemical real-time quantitative PCR chip. By using finite element simulation software ANSYS, temperature characteristics of the PCR chip were analyzed. According to the analysis results, insulation and thermal compensation were used to improve the thermal cycle system for electrochemical real-time quantitative PCR instrument, which was proved effective in the simulation test. Annular structure was applied to improve the consistency of temperature among every channel of the chip. Meanwhile, considering the character of the electrochemical detection, the structure of three layers, consisting of mono-crystalline silicon, aluminum and polycarbonate, was adopted to reduce the thermal hysteresis of the chip's reaction pool. Then, we simulated the temperature field of the chip based on its finite element model. Through the steady-state analysis, the thicknesses of the insulation layers and the thermal compensation temperature were determined so as to weaken the heat transfer effect between the chip and the peripheral air, which could improve the accuracy and uniformity of the chip's temperature. Furthermore, the thermal hysteresis and homoiothermy of the chip were tested in the improved thermal cyde system through transient analysis. The thermal analysis results of the chip in the improved thermal cyde system were as follows. The uniformity and accuracy errors of the temperature was less than 0.2°C. The temperature consistency error was 0°C among every channel of the chip. The ascending and cooling speeds were 4°C/s and 3°C/s, respectively. The facts indicated that the temperature characteristics of the thermal cyde system could meet the performance requirements of the PCR instrument well.

FEA for Steady-State Thermal Performance of PCR Thermal-Cycler Based on Thermoelectric Cooler

Study on factors affecting thermal performance of PCR thermal cycle system by equivalent circuit

Research on thermal cycle system for real-time PCR instrument based on equivalent circuit model

Modeling and Analysis of Thermal Cycle System for Quantitative PCR Instrument

FEA simulation research of temperature uniformity in quantitive PCR thermal cycle system

Research on temperature measuring positions selection and verification for Polymerase Chain Reaction instruments.

Research and verification of thermal model for PCR instrument temperature field

Simulation and experimental study of temprature lag time for Polymerase Chain Reaction instrument

Optimization design of structure of TEC temperature control system for microfluidic PCR

A Thermal Cycler Based on Magnetic Induction Heating and Anti-Freezing Water Cooling for Rapid PCR

Highly Precise and Fast Polymerase Chain Reaction Thermal Cycling Module with a Novel Integrated Temperature Control Strategy

Research on the Temperature Characteristics of Thermal Cycle System for Electrochemical Real-time Quantitative PCR Instrument

Temperature Control for PCR Thermocyclers Based on Peltier-Effect Thermoelectric

Implementation of Rapid Nucleic Acid Amplification Based on the Super Large Thermoelectric Cooler Rapid Temperature Rise and Fall Heating Module

Thermal-Electric and Stress Analysis of Thermoelectric Coolers under Continuous Pulse Input Current

Finite Element Analysis of Miniature Thermoelectric Coolers with High Cooling Performance and Short Response Time

Numerical Modeling of the Thermoelectric Cooler with a Complementary Equation for Heat Circulation in Air Gaps

Transient Modeling and Dynamic Characteristics of Thermoelectric Cooler

Two-dimensional Electrical Modeling of Thermoelectric Devices Considering Temperature-Dependent Parameters under the Condition of Nonuniform Substrate Temperature Distribution

Performance Analysis and Assessment of Thermoelectric Micro Cooler for Electronic Devices

Theoretical Analysis of the Cooling Performance of a Thermoelectric Element with Temperature-Dependent Material Properties