Abstract:In order to make the eletrochemical real-time quantitaive PCR instrument meet the requirements of temperature characterstics in the process of PCR amplification, some optimizations in structure and material of conventional PCR chip were made to fabricate a multi-channel electrochemical real-time quantitative PCR chip. By using finite element simulation software ANSYS, temperature characteristics of the PCR chip were analyzed. According to the analysis results, insulation and thermal compensation were used to improve the thermal cycle system for electrochemical real-time quantitative PCR instrument, which was proved effective in the simulation test. Annular structure was applied to improve the consistency of temperature among every channel of the chip. Meanwhile, considering the character of the electrochemical detection, the structure of three layers, consisting of mono-crystalline silicon, aluminum and polycarbonate, was adopted to reduce the thermal hysteresis of the chip's reaction pool. Then, we simulated the temperature field of the chip based on its finite element model. Through the steady-state analysis, the thicknesses of the insulation layers and the thermal compensation temperature were determined so as to weaken the heat transfer effect between the chip and the peripheral air, which could improve the accuracy and uniformity of the chip's temperature. Furthermore, the thermal hysteresis and homoiothermy of the chip were tested in the improved thermal cyde system through transient analysis. The thermal analysis results of the chip in the improved thermal cyde system were as follows. The uniformity and accuracy errors of the temperature was less than 0.2°C. The temperature consistency error was 0°C among every channel of the chip. The ascending and cooling speeds were 4°C/s and 3°C/s, respectively. The facts indicated that the temperature characteristics of the thermal cyde system could meet the performance requirements of the PCR instrument well.

Research and verification of thermal model for PCR instrument temperature field

Research on thermal cycle system for real-time PCR instrument based on equivalent circuit model

FEA simulation research of temperature uniformity in quantitive PCR thermal cycle system

Modeling and Analysis of Thermal Cycle System for Quantitative PCR Instrument

Study on factors affecting thermal performance of PCR thermal cycle system by equivalent circuit

Research on temperature measuring positions selection and verification for Polymerase Chain Reaction instruments.

FEA for Steady-State Thermal Performance of PCR Thermal-Cycler Based on Thermoelectric Cooler

Simulation and experimental study of temprature lag time for Polymerase Chain Reaction instrument

Research on the Temperature Characteristics of Thermal Cycle System for Electrochemical Real-time Quantitative PCR Instrument

PCR temperature control system based on thermal infrared imager

A Thermal Cycler Based on Magnetic Induction Heating and Anti-Freezing Water Cooling for Rapid PCR

Numerical Simulation of Micro Flow-Through Pcr Chip

The Relationship of the Denaturation Temperature and Results of PCR

Temperature-uniformity study on transverse flux induction heating applied to rapid PCR

Analytical Model of Thermal Field in Polymer Thermo-Optic Devices

Simulation of Rapid Thermal Cycle for Ultra-Fast PCR

Study on Micro PCR System and Its Temperature Control Property

Thermal Design of PCR Chip Based on Natural Convection in a Micro Chamber

Temperature control technology for PCR

MEMS-based Micro Chamber PCR Chip Thermal Analysis and Structural Improvement

Simulation analysis and experimental verification of thermodynamic characteristics of integrated droplet digital PCR chip