Abstract:A Ti-TiC-Fe cermet composite with a core-shell structure was fabricated by an in situ reaction at high temperature. The TiC-Fe cermet layer was formed at the interface between Ti and the gray cast iron (GCI). The XRD results indicate that the TiC-Fe cermet layer is composed mainly of alpha-Fe, Ti, and TiC. The statistical results of the electron backscattering diffraction (EBSD) indicate that the grain sizes are between 2 and 17 pm with the mean value of about 4 pm. The scanning electron microscope (SEM) analysis results demonstrated that the TiC-Fe cermet layer enwrapped the metallic Ti wire. The size of the TiC particles in the TiC-Fe cermet layer diminished gradually, and the tridimensional morphology varied from dense block to cubes or near-spheroids with the distance from interface of Ti/cermet layer to the interface of cermet layer/GCI. Accordingly, the nano-indentation results showed that the hardness of the TiC-Fe cermet layer decreased gradually with distance from interface of Ti/cermet layer to the interface of cermet layer/GCI, and that the highest hardness value of the TiC-Fe cermet layer is nearly 28.0 GPa. The high hardness and volume fraction of TiC-Fe cermet layer will obviously enhance the wear resistance of composites.

Formation of Layer-Shaped Pores in TiC-Fe Cermet by Combustion Synthesis

Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet

Microstructural evolution during combustion synthesis of TiC-Fe cermet

Dual-solution-precipitation mechanism of combustion synthesis of TiC-Fe cermet with fine Ti powder

Mechanism of Combustion Synthesis of TiC-Ti Cermet

Thermite Synthesis of TiC/FeNiCr Cermet with Double-Layer Structure

Microstructural Evolution in the Combustion Synthesis of Titanium Carbide

One-step Preparation of Dense TiC1 − Xnx–ni3ti Cermet by Combustion Synthesis

TiC-Fe cermets fabricated by SHS

Microstructural evolution during the combustion synthesis of TiC–Al cermet with larger metallic particles

Effect of Fe on the Phases and Microstructure of TiC–Fe Cermets by Combustion Synthesis/quasi-Isostatic Pressing

Mlicrostructure of TiAl/TiC cermet joint bonded by combustion synthesis

Microstructure of TiAl/TiC cermet joint bonded by combustion synthesis

Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis

Structure Formation in the Combustion Synthesis of Al2O3–TiC Composites

Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis

Characterization and Formation Mechanisms of the TiC-Fe Cermet Layer in Ti-TiC-Fe Composites

Investigation on microstructure of TiC-Fe cermets prepared by SHS/PHIP

In-situ Combustion Synthesis and Densification of TiC–xNi Cermets

Mechanosynthesis Mechanism of Tic Powders

Fast Preparation of ZTA-TiC-FeCrNi Cermets by High-Gravity Combustion Synthesis