Abstract:The microstructure evolution of Fe-Ti-C system synthesized by low temperature combustion in electric field was studied using the mixture powders compacts of 55wt%(Ti+C)-45wt%Fe heated to 250-800 degrees C by an analytical experiment of Gleeble-1500D thermal simulation equipment. The results show that the ignition temperature of Fe-Ti-C system can be greatly decreased under the action of electric field and high thermal density. Firstly, the microstructure changes with the heating temperature from 250 degrees C to 350 degrees C although no reaction occurred in the system. The system can be ignited so that the phenomenon of "thermal explosion" occurred from 350 degrees C to 470 degrees C, with a prior TiC synthesis reaction. As the temperature increased continuously from 470 degrees C to 670 degrees C, the TiC synthesis reaction followed by another Fe2Ti synthesis reaction. But a part of Fe2Ti can be decompounded when heated to 670-800 degrees C, so that the TiC synthesis reaction went on and finished completely at 800 degrees C. As a result, the synthesized products consisted of Fe, TiC and a little of Fe2Ti. In addition, the microstructure showed that fine TiC spherical particles were uniformly distributed in the Fe matrix.

Dual-solution-precipitation mechanism of combustion synthesis of TiC-Fe cermet with fine Ti powder

Mechanism of Combustion Synthesis of TiC-Ti Cermet

Microstructural evolution during combustion synthesis of TiC-Fe cermet

Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet

Role of iron addition in the combustion synthesis of TiC–Fe cermet

Microstructural evolution during the combustion synthesis of TiC–Al cermet with larger metallic particles

Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis

Microstructural Evolution in the Combustion Synthesis of Titanium Carbide

Effect of Particle Size of Iron on Reaction Velocity of Combustion Synthesis of Ti-C-Fe System

Formation of Layer-Shaped Pores in TiC-Fe Cermet by Combustion Synthesis

Mechanosynthesis Mechanism of Tic Powders

Combustion Synthesis of TiC–Fe Composites under the Action of an Electric Field

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Effect of Fe on the Phases and Microstructure of TiC–Fe Cermets by Combustion Synthesis/quasi-Isostatic Pressing

Combustion synthesis of (TiC+SiC) composite powders by coupling strong and weak exothermic reactions

Soot Combustion Performance and H2-TPR Study on Ceria-Based Mixed Oxides

Microstructure evolution of Fe-Ti-C system synthesized by low temperature combustion induced in electric field

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

In-situ Combustion Synthesis and Densification of TiC–xNi Cermets

One-step Preparation of Dense TiC1 − Xnx–ni3ti Cermet by Combustion Synthesis

Effects of TiAl additions on combustion synthesis of Ti3AlC2 powders