Abstract:Silicon carbon nitride (SiCN) films were deposited by dual ion beam sputtering (DIBS) of SiC target in mixed Ar/N2 atmosphere at 100°C. The surface roughness and the mechanical properties of the SiCN films were measured by using non-contact surface profilometer and nano-indenter. The bonding structure for the SiCN films was analyzed using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS), respectively. The influences of assisting ion beam energy and concentration on surface roughness, mechanical properties and bonding structure of the SiCN films were discussed systematically. The results showed that the variations of surface roughness and hardness for the SiCN films with the assisting ion beam energy were in the range of 7–27nm and 23–29GPa, respectively. With an increase in the nitrogen ion beam concentration, the film surface roughness first decreased to a minimum value, and then increased, while the hardness first increased to a peak value, and then decreased. When the assisting ion beam energy and concentration were 300eV and 0.5, the SiCN film possessed the low surface roughness of 11nm and the highest hardness of 29GPa, its atoms ratio, C:Si:N:O was about 1:0.42:0.18:0.32. The bonding structure of the SiCN films mainly consisted of Si–C, Si–N, C–N, CN and CC bonds and corresponded to a network of the mixed sp2/sp3 hybridized bonds with the units of Si(C4), Si(N4) and Si(C4−nNn). The film mechanical properties were correlated to the proportion of Si–C, Si–N, CN and C–N bonds in the SiCN films.

Influence of Sputtering Process on the Deposition and Optical Properties of Sicn Films

Optical Properties Study of Silicon Oxynitride Films Deposited by RF Magnetron Sputtering

Effect of the deposition conditions on the morphology and bonding structure of SiCN films

Preparation of silicon carbide nitride thin films by sputtering of silicon nitride target

Optical & Electronic Properties of Carbon Nitride Thin Films

Surface Roughness, Mechanical Properties and Bonding Structure of Silicon Carbon Nitride Films Grown by Dual Ion Beam Sputtering

Spectra Characterization of Silicon Carbonitride Thin Films by Reactive Radio Frequency Sputtering

STRUCTURAL ANALYSIS OF SiCN FILM PREPARED BY REACTIVE SPUTTERING

Study On Re-Sputtering During Cnx Film Deposition Through Spectroscopic Diagnostics Of Plasma

Deposition and Thermoelectric Properties of N-Doped SiC Thick Films

Modelling and Optimization for Deposition of SiO X N Y Films by Radio-Frequency Reactive Sputtering

Influences of different sputtering current on the microstructure and electrical properties of silicon nitride thin films deposited on cemented carbide tools

Deposition of SiOxNy films as gate insulator via r.f. reactive sputtering

Thin films of silicon nitride deposited at room temperature by non-reactive magnetron sputtering: radiofrequency power and deposition time influence on the formation of α-Si3N4 and its optical properties

Influence of radio frequency magnetron sputtering parameters on the structure and performance of SiC films

Mechanical Properties of Silicon Carbonitride Thin Films

Effects of C/Si ratios on structures and behaviors of NbSiCN nanocomposite films synthesized by reactive magnetron sputtering

Ion-beam-assisted Deposition of CNx Films

Investigation of Carbon Nitride Films Deposited by Ion Beam-Assisted Deposition with Low Bombarding Energy of N Ions

Structures and bonding properties of carbon nitride films prepared by radio frequency magnetron sputtering

Preparation and Characterisation of Carbon Nitride Films Deposited by Pulsed Laser Arc Deposition