Abstract:Amorphous hydrogenated silicon carbonitride (a-SiCN:H) thin films were grown using electron cyclotron resonance chemical vapour deposition using a mixture of methane, nitrogen, and silane as precursors. The origin of the variation of macroscopic properties such as hardness (H), elastic modulus (E), photoluminescence (PL), and the optical band gap was investigated through their correlation with the microscopic features of a-SiCN:H thin films as a function of the process parameters, including the deposition temperature and methane gas flow rate. From a microstructural perspective, the thin films were investigated using x-ray photoelectron spectroscopy, Rutherford backscattering spectrometry, elastic recoil detection, transmission electron microscopy, and x-ray diffraction. It is verified that an increase of the substrate temperature resulted in the substitution of hydrogen atoms mainly by carbon atoms, causing the density of the silicon carbide-related structures to increase in the amorphous structure of the a-SiCN:H thin films. Hardness and elastic modulus were found to increase with the deposition temperature and decreased with an increase of the methane gas flow during the deposition, resulting in higher carbon content in the films. The observed changes are ascribed to the reduced density of the weak hydrogen terminated bonds and the variation of the relative bond density of Si-C to Si-N bonds. In addition, the thin films were depth profiled using a slow positron beam to investigate the role of vacancies. The observed increase of the positronium formation with increasing deposition temperature was found to correlate with the variation of PL, where an enhancement of the visible emission originating from carbon-related defects was observed. A set of optimized process parameters to fabricate a-SiCN:H thin films with improved visible emission and hardness properties is suggested.

Mechanical Properties of Silicon Carbonitride Thin Films

Optical & Electronic Properties of Carbon Nitride Thin Films

Optical Properties Study of Silicon Oxynitride Films Deposited by RF Magnetron Sputtering

Surface Roughness, Mechanical Properties and Bonding Structure of Silicon Carbon Nitride Films Grown by Dual Ion Beam Sputtering

Process-dependent mechanical and optical properties of nanostructured silicon carbonitride thin films

Measurement and Analysis on the Mechanical Properties of Silicon Carbide Film

Spectra Characterization of Silicon Carbonitride Thin Films by Reactive Radio Frequency Sputtering

Microstructure and Mechanical Properties of Carbon Nitride Multilayer Films Deposited by DC Magnetron Sputtering

Optimizing hardness of CN x thin films by dc magnetron sputtering and a statistical approach

Effects of Atomic Ratio on the Mechanical Properties of Amorphous Silicon Carbon Nitride

Structural and Mechanical Properties of CrN Thin Films Deposited on Si Substrate by Using Magnetron Techniques

Effects of C/Si ratios on structures and behaviors of NbSiCN nanocomposite films synthesized by reactive magnetron sputtering

Growth and Mechanical Properties of Amorphous and Nanostructured SiC films

Nanoindentation of cubic silicon carbide on silicon film

Preparation and Characterisation of Carbon Nitride Films Deposited by Pulsed Laser Arc Deposition

Properties of SiCN Films Relevant to Dental Implant Applications

Preparation of silicon carbide nitride thin films by sputtering of silicon nitride target

Mechanical strength of nitrogen-doped silicon single crystal investigated by three-point bending method

Preparation And Characterization Of Silicon Carbide Thin Films Synthesized By Rf-Reactive Sputtering

Film Thickness Effects on Mechanical and Tribological Properties of Nitrogenated Diamond-Like Carbon Films

Influence of Sputtering Process on the Deposition and Optical Properties of Sicn Films