Abstract:This study involved direct doping of In2O3 into silicon carbide (SiC) powder, resulting in 8.0 at% In-doped SiC powder. Subsequently, heating at 500 °C was performed to form a target, followed by the utilization of electron beam (e-beam) technology to deposit the In-doped SiC thin films with the thickness of approximately 189.8 nm. The first breakthrough of this research was the successful deposition of using e-beam technology. The second breakthrough involved utilizing various tools to analyze the physical and electrical properties of In-doped SiC thin films. Hall effect measurement was used to measure the resistivity, mobility, and carrier concentration and confirm its n-type semiconductor nature. The uniform dispersion of In ions in SiC was as confirmed by electron microscopy energy-dispersive spectroscopy and secondary ion mass spectrometry analyses. The Tauc Plot method was employed to determine the Eg values of pure SiC and In-doped SiC thin films. Semiconductor parameter analyzer was used to measure the conductivity and the I-V characteristics of devices in In-doped SiC thin films. Furthermore, the third finding demonstrated that In2O3-doped SiC thin films exhibited remarkable current density. X-ray photoelectron spectroscopy and Gaussian-resolved spectra further confirmed a significant relationship between conductivity and oxygen vacancy concentration. Lastly, depositing these In-doped SiC thin films onto p-type silicon substrates etched with buffered oxide etchant resulted in the formation of heterojunction p-n junction. This junction exhibited the rectifying characteristics of a diode, with sample current values in the vicinity of 102 mA, breakdown voltage at approximately -5.23 V, and open-circuit voltage around 1.56 V. This underscores the potential of In-doped SiC thin films for various semiconductor devices.

Deposition and Thermoelectric Properties of N-Doped SiC Thick Films

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

PREPARATION OF SiC-B4C COMPOSITE FILM AND ITS MECHANICAL AND THERMOELECTRIC PROPERTIES

Temperature influence on the deposition of nitrogen-doped SiC polycrystalline films

Growth and Mechanical Properties of Amorphous and Nanostructured SiC films

Thermal Conductivity of Cubic Silicon Carbide Single Crystals Heavily Doped by Nitrogen

Thermoelectric Properties of Ti Doped N-Type SiC Composites

Silicon Doping Effect on the Crystallization Behavior of Ge2Sb2Te5 Film

Influence of Boron-doping on Electrical Properties of Na-Si:H Thin Film Prepared by PECVD

Electrical and reliability performances of nitrogen-incorporated silicon carbide dielectric by chemical vapor deposition

Characterizations on the Doping of Single-Crystal Silicon Carbide

Synergetic enhancement of electrical conductivity and infrared emissivity of SiC-MoSi2 ceramics via N doping

Effect of nitride addition on the electrical and thermal properties of pressureless solid-state sintered SiC ceramics

Microstructural, electrical, and mechanical properties of conductive SiC ceramics fabricated by spark plasma sintering

The Temperature-Dependent Thermal Conductivity of C- and O-Doped Si3N4: First-Principles Calculations

Influences of different sputtering current on the microstructure and electrical properties of silicon nitride thin films deposited on cemented carbide tools

Thermoelectric properties of SiC nanocomposite Mg 2 Si 0.4 Sn 0.6 with Sb doping prepared by vacuum induction levitation melting and spark plasma sintering

Dielectric and infrared properties of silicon carbide nanopowders

Formation of High Conductive Nano-Crystalline Silicon Embedded in Amorphous Silicon-Carbide Films with Large Optical Band Gap

THERMOELECTRIC PROPERTIES OF <font>Ti</font>-DOPED <font>SiC/TiC</font><sub>x</sub> COMPOSITE SYNTHESIZED BY TPPP METHOD

Investigations of In2O3 Added SiC Semiconductive Thin Films and Manufacture of a Heterojunction Diode