Abstract:Thermal conductivity ( κ ) is a crucial parameter in determining the thermoelectric figure of merit, zT , of thermoelectric materials. Consequently, numerous innovative strategies have been developed in recent years to reduce κ to the glass-like limit for enhanced thermoelectric properties. In this study, we employ a donor-like dopant, Sb, in GeTe to decrease both the electronic and lattice thermal conductivity. By reducing the hole concentration to 1.4 × 10 20 cm −3 in Ge 0.92 Sb 0.08 Te, we achieve a significantly low electronic thermal conductivity of 0.56 W m −1 K −1 at room temperature. Additionally, the strain and mass field fluctuations resulting from the presence of impurity atoms strengthen phonon scattering, effectively suppressing the lattice thermal conductivity. Furthermore, SiC nano-composites are intentionally introduced into the matrix, which leads to grain refinement. The grain boundaries and phase boundaries also contribute significantly to the reduction of lattice thermal conductivity, ultimately resulting in a small value of 0.42 W m −1 K −1 for the sample Ge 0.92 Sb 0.08 Te + 0.2 wt% SiC at room temperature. The Vickers hardnesses for all composite samples are measured which reveal strengthened hardness, thanks to the grain refinement. The improved peak zT for the Ge 0.92 Sb 0.08 Te + 0.2 wt% SiC sample is mostly attributed to the multiple reductions in κ . Through simulation, a high power density of 36 mW has been achieved for a single-leg Ge 0.92 Sb 0.08 Te + 0.2 wt% SiC thermoelectric device with a temperature difference of Δ T = 438 K. Our contribution demonstrates that elemental doping combined with nanocompositing can effectively suppress the thermal conductivity from room temperature to high temperature, beneficial for enhanced thermoelectric properties.

Thermoelectric properties of SiC nanocomposite Mg 2 Si 0.4 Sn 0.6 with Sb doping prepared by vacuum induction levitation melting and spark plasma sintering

Multiscale microstructures and improved thermoelectric performance of Mg 2 ( Si 0.4 Sn 0.6 ) Sb x solid solutions

Synergistically Optimized Thermoelectric and Mechanical Properties of Mg3.2Bi1.5Sb0.5-SiC Composites.

Effect of Sb Doping on the Thermoelectric Properties of Mg 2 Si 0.7 Sn 0.3 Solid Solutions

Thermoelectric and Mechanical Properties of ZnSb/SiC Nanocomposites

Effect of Sb Doping on the Thermoelectric Properties of Mg<sub>2</sub>Si<sub>0.7</sub>Sn<sub>0.3</sub> Solid Solutions

Lead-free AgSn4SbTe6 Nanocomposites with Enhanced Thermoelectric Properties by SiC Nanodispersion

Enhanced thermoelectric performance of Sb-doped Mg2Si0.4Sn0.6 via doping, alloying and nanoprecipitation

(Bi,sb)2te3/sic Nanocomposites with Enhanced Thermoelectric Performance: Effect of SiC Nanoparticle Size and Compositional Modulation

Enhanced Thermoelectric Performance by Strong Phonon Scattering at the Heterogeneous Interfaces of the Mg 2 Sn/Mg 3 Sb 2 High-Content Nanocomposite

Thermoelectric Properties of Sb-doped Mg2 Si0.59 Sn0.41 Solid Solutions

Thermoelectric properties of Sb-doped Mg2Si0.59Sn0.41solid solutions

Effect of GaSb Addition on the Thermoelectric Properties of Mg2Si0.5Sn0.5 Solid Solutions

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Thermoelectric properties of n‐type Mg<sub>2</sub>Si<sub>0.6–<i>y</i></sub>Sb<i><sub>y</sub></i>Sn<sub>0.4</sub>compounds

Simple Synthesis and Thermoelectric Properties of Mg2 + xSi0.5Sn0.5Sb0.075 Materials with Heterogeneous Microstructure

Thermoelectric and Mechanical Properties of Nano-Sic-dispersed Bi2Te3 Fabricated by Mechanical Alloying and Spark Plasma Sintering

High Figures Of Merit And Natural Nanostructures In Mg2si0.4sn0.6 Based Thermoelectric Materials

Enhancing the thermoelectric performance of GeTe through Sb doping and nanocompositing with SiC for reduced thermal conductivity

Effect of Sb-Doping on the Thermoelectric Properties of Mg2Si Based Compounds

Variations of Thermoelectric Properties of Mg2.2si1-Ysny-0.013sb0.013 Materials with Different Si/Sn Ratios