Abstract:Silicon carbon nitride thin films were deposited on Co-Cr alloy under varying deposition conditions such as sputtering power and the partial pressure ratio of N(2) to Ar by radio frequency and direct current magnetron sputtering techniques. The chemical bonding configurations, surface topography and hardness were characterized by means of X-ray photoelectron spectroscopy, atomic force microscopy and nano-indentation technique. The sputtering power exhibited important influence on the film composition, chemical bonding configurations and surface topography, the electro-negativity had primary effects on chemical bonding configurations at low sputtering power. A progressive densification of the film microstructure occurring with the carbon fraction was increased. The films prepared by RF magnetron sputtering, the relative content of the Si-N bond in the films increased with the sputtering power increased, and Si-C and Si-Si were easily detachable, and C-O, N-N and N-O on the film volatile by ion bombardment which takes place very frequently during the film formation process. With the increase of sputtering power, the films became smoother and with finer particle growth. The hardness varied between 6 GPa and 11.23 GPa depending on the partial pressure ratio of N(2) to Ar. The tribological characterization of Co-Cr alloy with Si-C-N coating sliding against UHMWPE counter-surface in fetal bovine serum, shows that the wear resistance of the Si-C-N coated Co-Cr alloy/UHMWPE sliding pair show much favourable improvement over that of uncoated Co-Cr alloy/UHMWPE sliding pair. This study is important for the development of advanced coatings with tailored mechanical and tribological properties. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.

Influence of radio frequency magnetron sputtering parameters on the structure and performance of SiC films

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

The Influence of Radio Frequency Power on the Characteristics of Carbon-Rich Hydrogenated Amorphous Silicon Carbide Films

Structural and mechanical properties of amorphous Si–C-based thin films deposited by pulsed magnetron sputtering under different sputtering powers

The Structure, Surface Topography and Mechanical Properties of Si–C–N Films Fabricated by RF and DC Magnetron Sputtering

Microstructure, mechanical and high-temperature tribological properties of amorphous SiC films by pulsed magnetron sputtering

Surface Morphology of Α-Sic Coatings Deposited by RF Magnetron Sputtering

Effect of Technological Parameters of Sputtering on the Microstructure of Silicon Film Investigated by Raman Analysis

Growth and Mechanical Properties of Amorphous and Nanostructured SiC films

Effect of assistant RF plasma on structure and properties of SiCN thin films prepared by RF magnetron sputtering of SiC target

XPS Analysis of SiC Films Prepared by Radio Frequency Plasma Sputtering

Structure and corrosion resistance of SiC thin film coated on NdFeB by magnetron sputtering

Investigation of Amorphous-Sic Thin Film Deposition by RF Magnetron Sputtering for Optical Applications

Comparative Study of the Tribology of Amorphous Carbon Films Via Magnetron Sputtering Depending on the Different Magnetic Field

Structural and Optical Properties of SiC Films Deposited on Si by DC Magnetron Sputtering

Influences of different sputtering current on the microstructure and electrical properties of silicon nitride thin films deposited on cemented carbide tools

Influence of Sputtering Process on the Deposition and Optical Properties of Sicn Films

Influence of Substrates on the Microstructure and Electrical Properties of Si/Mo Thin Films

Effect of sputtering power on the properties of SiO 2 films grown by radio frequency magnetron sputtering at room temperature

Measurement and Analysis on the Mechanical Properties of Silicon Carbide Film

Effect of Si Content on the Tribological Properties of Crsin Films in Air and Water Environments