Abstract:Due to its high bonding energy and low self-diffusion coefficient, silicon nitride (Si3N4) ceramics cannot form a dense structure with prolonged high-temperature insulation or by raising the sintering temperature. To improve the density of the sintered Si3N4 ceramics, additives are added to promote the rearrangement–dissolution–precipitation process of the crystal grains. However, the liquid phase formation temperature of different sintering aid chemical compositions varies, making it challenging to isolate the mechanism and the effect of liquid phase formation temperatures on sintering. Hence, we developed three sintering aids, namely Y2O3-Al2O3 (YA), Y2Si2O7 (Y2S), and Y2Si2O7-Al6Si2O13 (Y2SM), with homologous elements and different liquid phase formation temperatures. These sintering aids can form a liquid phase with SiO2 on the surface of Si3N4 at varying temperatures. We analyzed the sintered Si3N4 ceramic's density, volume shrinkage rate, and microstructure to verify the YA's lower liquid phase formation temperature effect, providing more rearrangement time and increasing sintering density. Conversely, sintering aids with too low liquid phase formation temperatures are more prone to volatilize during high-temperature sintering stages, thereby reducing sintering density. This research found that different liquid phase formation temperatures do not affect the α→β phase transition temperature of Si3N4 ceramics. We also evaluated the Y2S sintering aid contents' effect on Si3N4 ceramics sintering. The results revealed that aiding sintering with too little Y2S content is insufficient for liquid phase production, and hence does not improve sintering density. Conversely, excessive liquid phase can improve density and refine grain size but increases weight loss rate during sintering due to volatilization.

Migration of Liquid Phases in Low-temperature Sintering of AlN

Migration of Liquid Phase and Grain Growth in Low-Temperature Sintering of AlN

Microstructure of low-temperature sintered AlN

Characterization of the Microstructure of Sintered Aln by Sem and Tem

EFFECT OF Li2O ON SINTERING OF AlN CERAMICS AT LOW TEMPERATURE

Effects of Li2o on the Low Temperature Sintering and Thermal Conductivity of Aln Ceramics

Microstructure and thermal conductivity of aluminium nitride with (CaY)F3 as the sintering aid

Effect of Y2O3 on low temperature sintering and thermal conductivity of AlN ceramics

Effect Of Aln Content On The Pressureless Sintering Behaviors Of Sic-Aln Multiphase Ceramics

Thermal Conductivity of AlN Ceramics Sintered with CaF2 and YF3

A Study on the Effects of Liquid Phase Formation Temperature and the Content of Sintering Aids on the Sintering of Silicon Nitride Ceramics

Thermal Conductivity of AlN Ceramics with CaF2-YF3 Addition

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Transient Liquid-Phase Sintering And Thermal Conductivity Of Ain

Low-Temperature Sintering of AlN Ceramics by Sm 2 O 3 -Y 2 O 3 -Cao Sintering Additives Formed Via Decomposition of Nitrate Solutions

Effect of YF3 on densification behavior and thermal conductivity of AlN ceramics with Y2O3–YF3 additives under reducing atmosphere

Migration of Liquid Phase from the Primary/peritectic Interface in a Temperature Gradient

Secondary Phases and Interfaces in a Nitrogen-Atmosphere Sintered Al Alloy: Transmission Electron Microscopy Evidence for the Formation of AlN During Liquid Phase Sintering

Microstructure and thermal conductivity of aluminium nitride with (YCa)F3 as sintering aid

Low Temperature Sintering Process of Si3N4 Ceramics with Li2O as Sintering Additive

Effects Of Different Additives On Densification And Alpha-Beta Phase Transformation In Si3n4 Ceramics