Abstract:Through comparative investigation on the growth of oxidation-induced stacking faults (OSFs) in heavily antimony (Sb)-doped and phosphorus (P)-doped Czochralski (Cz) silicon wafers with almost the same resistivity, effects of dopants on the growth of OSF in heavily doped n-type Cz silicon are studied experimentally. Moreover, the influences of Sb and P atoms on the recombination of self-interstitials and vacancies are also explored on the basis of the first-principles calculations. It is shown experimentally that all the OSF lengths are almost identical regardless of the type and density of OSF nucleation centers, such as copper precipitates and mechanical scratches etc.. However, it is found that the OSF length of heavily Sb-doped Cz silicon wafer is larger than that of heavily P-doped Cz silicon wafer under the same oxidation condition. Essentially, the OSFs are formed by the aggregation of silicon self-interstitials released at the Si/SiO 2 interface during the oxidation. Therefore, a longer OSF implies that a higher quantity of silicon self-interstitials remains after the recombination of vacancies and silicon self-interstitials in the heavily Sb-doped Cz silicon wafer. The first-principles calculations based on density functional theory (DFT) indicate that Sb atoms combine with vacancies more readily than P atoms. This is actually due to the fact that Sb has a much larger atomic size than P. In other words, as compared with P atoms, the Sb atoms are the more efficient vacancy-trapping centers, thus retarding the recombination of vacancies and silicon self-interstitials. Consequently, the silicon self-interstitials remain after recombination with the vacancies that are much more in heavily Sb-doped Cz silicon wafer than in heavily P-doped counterpart when undergoing the same oxidation. In turn, the OSFs in heavily Sb-doped silicon wafers are relatively longer.

Gettering of defects in silicon by porous silicon

Studies of defect states in the interface between SiO2 and a-Si:H films

Grown-in Defects in Heavily Phosphorus-Doped Czochralski Silicon

Gettering of Copper by Defects in Silicon

Study of the Heavy Metal Gettering Effect of Porous Silicon on SOI Structure

Effects of dopants on the growth of oxidation-induced stacking faults in heavily doped n-type Czochralski silicon

Defect Engineering In Silicon Used For Ultra Large-Scale Integrated Circuits

Effects of silicon surface defects on the graphene/silicon Schottky characteristics

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Microstructure and oxidation of porous silicon

Photoluminescence, Composition and Microstructure of Porous Silicon Prepared by Different Substrates

Evolution of secondary defects in arsenic implanted Si

Internal Gettering of Silicon Wafers for VLSI

Luminescence and photoconductivity properties of porous polycrystalline silicon

The Influence of Microstructure on Optical Properties of Porous Silicon

Achieving Porous Germanium from Both P- and N-Type Epitaxial Ge-on-Si Via Bipolar Potentiostatic Etching

Gettering of Fe Impurities by Bulk Stacking Faults in Czochralski-Grown Silicon

Investigation of Intrinsic Gettering for Germanium Doped Czochralski Silicon Wafer

Oxygen Precipitation and Induced Defects in Heavily Doped Czochralski Silicon

Porous Silicon Fabrication and Surface Cracking Behavior Research Based on Anodic Electrochemical Etching▴

Internal gettering for germanium-doped Czochralski silicon: Treated by rapid-thermal-anneal based processing simulation