Abstract:The physical properties of metal-based structural materials, such as hardness, strength and toughness, are directly or indirectly affected by residual stress inside or on the surface of the given part. Repeated rapid heating and cooling during the additive manufacturing process causes thermal gradients and expansion and contraction in the material, which causes residual stress. Tensile residual stresses are known to exist on the surface of additive manufactured products and should be kept to a minimum as they affect the mechanical properties and lead to product deformation and product failure. Therefore, it is important to evaluate the residual stress after making the product and to control it under the desired conditions. There are limitations to using the destructive method commonly used for residual stress evaluation with additive manufacturing products, due to difficulties in repeated measurements, product size, and cost issues. Therefore, it is necessary to apply a non-destructive evaluation method and verify the validity of the method. In this study, A356.2 aluminum alloy powders were used for additive manufacturing using the powder bed fusion process, and the surface residual stress generated during the process was measured. X-ray diffraction (XRD) methods were used to observe the surface residual stress. After XRD measurement, analyses were performed using the Williamson-Hall plot, sin 2 ψ, and cosα methods. The residual stress measurement results of samples manufactured through the LPBF process and the characteristics and limitations of each method were discussed.

Determination of residual stresses in metal matrix composite

X-Ray Computer Tomography on Residual Stress Measurement

THE-STATE-OF-THE-ART OF THE STUDY ON RESIDUAL STRESS MEASUREMENT BY X-RAY ANALYSIS

Method to Analyze and Evaluate the Depth Profile of the Three Dimensional Residual Stresses State with X-ray

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Pretension-Dependent Residual Stress of Alumina Fiber-Reinforced Composite Wire

Determination of Residual Stress Distribution Combining Slot Milling Method and Finite Element Approach

Analysis Of The Thermo-Residual Stress In Production On Fiber Reinforced Aluminum Matrix Composites

Recent Progress Of Residual Stress Distribution And Structural Evolution In Materials And Components By Neutron Diffraction Measurement At Rsnd

Strains and Stresses in Multilayered Materials Determined Using High-Energy X-ray Diffraction

Neutron diffraction residual stress determinations in titanium aluminide component fabricated using the twin wire-arc additive manufacturing

Comparison of Residual Stress Measurements Conducted by X-ray Stress Analysis and Incremental Hole Drilling Method

Recent progress of residual stress measurement methods: A review

Measurement Of Residual Strain And Stress In Fiber-Reinforced Composite By Electron Moire Method

Evaluation of Residual Stress Depth Profiling in 7075 Aluminum Alloy Plates

Experimental Study of the Residual Stress of Integrated Composite Structure

Residual Stress Analysis of Additive Manufactured A356.2 Aluminum Alloys using X-Ray Diffraction Methods

Comparison of Residual Stress Analysis Methods: X-Ray Diffraction Method vs Stress Release Method

Neutron diffraction methods for the study of residual stress fields

A Study of the Residual Stress and Its Influence on Tensile Behaviors of Fiber-Reinforced Sic/Al Composite