Abstract:In order to investigate the effect of strain rate and high temperature exposure on the mechanical properties of the fibre in the unidirectional fibre reinforced metal-matrix composite, in situ SiC fibre bundles are extracted from two kinds of SiC/Al composite wires, which are heat-treated at two different temperatures (exposed in the air at 400 and 600 °C for 40 min after composition). Tensile tests for these two fibre bundles are performed at different strain rates (quasi-static test: 0.001 s−1, dynamic test: 200, 700, and 1200 s−1) and the stress–strain curves are obtained. The experimental results show that their mechanical properties are rate-dependent, the modulus E, strength σb and unstable strain εb (the strain corresponding to σb) all increase with increasing strain rate. Compared with the mechanical properties of the original SiC fibre, those of the two in situ fibres degrade to some extent, the degradation of the in situ fibre extracted from the composite wire exposed at 600 °C (hereafter referred to as in situ fibre 2) is more serious than that of the in situ fibre extracted from the composite wire exposed at 400 °C (hereafter referred to as in situ fibre 1). The mechanism of the degradation is investigated. A bi-modal Weibull statistical constitutive equation is established to describe the stress–strain relationship of the two in situ fibre bundles. The simulated stress–strain curves agree well with the experimental results.

A Study of the Residual Stress and Its Influence on Tensile Behaviors of Fiber-Reinforced Sic/Al Composite

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Effects of Interfacial Residual Stress on Mechanical Behavior of SiC F /sic Composites

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite

Residual Stresses and Mechanical Properties of Si 3 N 4 /sic Multilayered Composites with Different SiC Layers

Effect of thermal residual stresses on yielding behavior under tensile or compressive loading of short fiber reinforced metal matrix composite

Thermal Residual Stresses and Stress Distributions under Tensile and Compressive Loadings of Short Fiber Reinforced Metal Matrix Composites

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

The performance transition of C/SiC composites induced by redistribution of residual stress

The Effects of Thermal Residual Stresses and Interfacial Properties on the Transverse Behaviors of Fiber Composites with Different Microstructures

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

Experimental study of residual stress distribution in interfacial micro-region of SiC f /Ti17 composites via micro-slotting method

Analysis of the Residual Stress in Al 2 O 3 −sic Nanocomposites

Investigating the Effects and Mechanisms of Thermal–Vibration-Coupled Stress Relief Treatment on Residual Stress in SiC/Al Composites

Numerical Analysis of the Effects of Reinforcing Particles on the Residual Stress of TiB2/Al-Si Composites Fabricated by Laser Powder Bed Fusion

An Experimental Study on the in Situ Strength of Sic Fibre in Unidirectional Sic/Al Composites

A Combined Investigation of Bending Behavior of a SiC Fiber‐Reinforced Titanium Matrix Composite with Compressive and Tensile Tests

Influence of pre-plastic deformation on thermal residual stress and yield strength of SiCw/Al composites

Residual stress analysis in the Al2O3/Ti 3SiC2 multilayer composites

The relaxation behavior of thermal stress in a SiCw/Al composite