Abstract:Abstract Ceramic matrix composites (CMCs) play an increasingly significant role in the modern aerospace industry due to their excellent high-temperature mechanical properties. Fatigue property at elevated temperatures is an essential issue for their application, especially for the turbine blades of aircraft engines subjected to cyclic loading under extreme conditions. A progressive fatigue damage approach was established to predict the damage initiation and evolution of braided SiC/SiC CMCs under tension-tension cyclic loading. The main framework was achieved via a user-material subroutine UMAT in ABAQUS with FORTRAN code. Different damage initiation criteria are introduced for fiber bundles, matrix and interface. Related experimental results reveal that the main reasons for the failure of composites under cyclic loading are the loss of bearing capacity of the matrix, the decrease of fiber strength in high-temperature oxidation environment and the interface wear. Hence, the stiffness and strength degradation of matrix and fiber bundles as well as the interfacial shear stress reduction are used to describe the fatigue damage in this method. And a specific proportion of failure elements on the loading surface is regarded as the symbol of the eventual failure of the composites. Damage evolution of different constituents during the fatigue process can be simulated with this method. Subsequently, the simulation results of static and fatigue analysis were compared with relevant experimental results at 1300°C. It indicates that the predicted static tensile strain-stress curve, and curves of maximum strains vs cycles in the fatigue analysis are in good agreement with that measured during the experiments. Besides, the predicted fatigue life also exhibits an acceptable consistency.

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

Damage Evolution of the Interphase on C/SiC Composites with CZM Method

FEM Analysis of the Stress Response and Failure Mechanism of SiC-coated Cf/ SiC Composites During Thermal Shock

Tensile Behavior of 2D-C/sic Composites at Elevated Temperatures: Experiment and Modeling

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

High-temperature constitutive model for three-dimensional needled C/C-SiC composite under tensile loading

A Damage-Based Fatigue Model of Braided Ceramic Matrix Composites at Elevated Temperature

Numerical Simulation of Thermal Residual Stresses For Unidirectional C/SiC Composites

Tensile Damage Evolution of Unidirectional Ceramic Matrix Composites under Thermal Stress

Effects of Heat Treatment on the Tensile Behavior and Damage Evolution of A 3d C/Sic Composite

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

The performance transition of C/SiC composites induced by redistribution of residual stress

Atomistic Studies of the Responses of Composites with Thermal Residual Stresses and Defects under Uniaxial Loading

Effect of interface damage on tensile behavior of fiber-reinforced ceramic-matrix composites after thermal fatigue loading

Parametric Influences of Geometric Dimensions on High Temperature Mechanical Behaviors and Damage Mechanisms of Ceramic Matrix Composite and Superalloy Double Bolted Joints

Temperature-Dependent Fatigue Damage Evolution of Fiber-Reinforced Ceramic-Matrix Composites

Influence of Applied In-Plane Strain on Transverse Thermal Conductivity of 0°/90° and Plain Weave Ceramic Matrix Composites

Effect of temperature gradients and stress levels on damage of C/SiC composites in oxidizing atmosphere

Residual Stress Homogenization of SiCP/Al Composites with Thermal Vibration Coupling

Studying the Nonlinear Properties and Strain-Rate Sensitivity of SiC Short Fiber-Reinforced Al Matrix Composites