Abstract:<p>The focus of this work is to characterize the progressive damage and failure behavior of 2.5D woven alumina fiber reinforced silica ceramic matrix thin composite specimen under a planar tension-shear stress state. The tensile and shear stress-strain diagrams in the principal material coordinate system were obtained using the off-axis tension test with the digital image correlation technique. A mesoscale finite element model of the composite material was developed within the framework of continuum damage mechanics. The thickness effect on the macroscopic mechanical response was considered by removing the periodic boundary conditions along the thickness direction. The macroscopic stress-strain response given by the numerical model was validated by the experimental results. The interaction of the planar biaxial tension and shear stresses was taken into account in the model, quantified using a shear contribution coefficient in the modified 3D Hashin failure criterion. The results from the damage evolution analysis indicate that the linear tensile stress-strain response with a brittle fracture characteristic for the on-axis tension specimen is governed by the axial fiber bundle. The nonlinear tensile stress-strain response with the significantly reduced ultimate stress under biaxial tension and shear stress state results from multiple damages with evolution in both axial and transverse fiber bundles. Both the effective tensile modulus and the ultimate tensile strength increase with increasing the thickness of the specimen due to the increase of the fiber volume fraction. The strengthening induced by the size effect is less significant for the specimen under biaxial tension and shear stress state than that for the on-axis tension specimen owing to the involvement of shear response dominated by the matrix of the material. The results of this study provide new insight into the failure of 2.5D woven ceramic-based composite material, which contributes to the optimal design of the reusable thermal protection system structure.</p>

Parametric Influences of Geometric Dimensions on High Temperature Mechanical Behaviors and Damage Mechanisms of Ceramic Matrix Composite and Superalloy Double Bolted Joints

Thermal Mismatch Effect and High-Temperature Tensile Performance Simulation of Hybrid CMC and Superalloy Bolted Joint by Progressive Damage Analysis

Thermo-mechanical Analysis of a Multilayer Hollow Cylindrical Thermal Protection Structure with Functionally Graded Ultrahigh-Temperature Ceramic to Be Heat Resistant Layer

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

High Temperature Fatigue Assessment of a SiCf/SiC Ceramic Matrix Composite Using Advanced Monitoring Techniques

Test and simulation of high temperature resistant polyamide composite with single lap single bolt connection

Experimental and Finite Element Research on the Failure Mechanism of C/C Composite Joint Structures under Out-of-Plane Loading

Experimental and numerical investigation of progressive damage and failure behavior for 2.5D woven alumina fiber/silica matrix composites under a complex in-plane stress state

Experimental and numerical analysis of CMCs mechanical properties under high-temperature thermal gradient environment

A hierarchical multiscale model for the elastic-plastic damage behavior of 3D braided composites at high temperature

Computational Micromechanics for High-Temperature Constitutive Equations of Polymer-Matrix Composites With Oxidation Reaction, Damage, and Degradation

High-temperature constitutive model for three-dimensional needled C/C-SiC composite under tensile loading

Study on mechanical properties and thermal conductivity of 3D short carbon fiber reinforced ultra-high temperature ceramic matrix composites: A novel material performance evaluation model

Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

An analytical model for the high temperature fracture strength of SiC fiber reinforced ceramic matrix composites considering oxidation and residual thermal stresses

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

Modeling the thermo-mechanical behavior of a woven ceramic matrix composite at high temperatures