Abstract:This paper aimed at extending a model developed by Ladeveze to capture thermal expansion and coupled thermo-mechanical phenomena, as such as those encountered at elevated and extreme temperatures. In the new model a linear thermal expansion coefficient is added to equation of state to account for the thermal to mechanical coupling effects. The mechanical to thermal effects are introduced by assuming an internal heat generation due to residual strain effects. The constitutive relations of the coupled thermo-mechanical behaviors of ceramic matrix composite material model were incorporated into Abaqus finite element code as user defined material software. An extension of the methodology presented by Letombes to calibrate the ceramic matrix composite damage model parameters based on a woven silicon-carbide silicon-carbide material developed by Safran Group. Feasibility tests (tension-compression, tension-tension cyclic, simple tension tests) based on a dog bone and open hole specimen tests demonstrated a good capturing of nonlinear as well as coupled thermos-mechanical behaviors in the silicon-carbide silicon-carbide material.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a model that can accurately predict the thermo - mechanical behavior of ceramic matrix composites (CMC) in high - temperature environments. Specifically, the paper aims to extend the continuous damage model proposed by Ladeveze et al. in 1983 to cover thermal expansion and coupled thermo - mechanical phenomena, which are especially important under extreme temperature conditions. ### Main problems and objectives 1. **Limitations of existing models**: - Current finite element (FE) models used to analyze CMC materials are usually limited to the linear - elastic range and cannot capture the regions of strain and stress localization, which are precursors to material damage and fracture. - Existing models fail to effectively describe the damage accumulation of materials under extreme thermo - mechanical loads and its impact on the overall performance of the system. 2. **Challenges in high - temperature environments**: - In applications such as aerospace, CMC materials need to withstand extremely high temperatures and severe temperature gradients, which will lead to thermo - mechanical fatigue, creep, and chemo - mechanical coupling effects of the materials. - A model that can predict these complex behaviors is required to ensure the reliability and service life of materials under extreme conditions. 3. **Objectives of model extension**: - Introduce the coefficient of thermal expansion to consider the thermo - mechanical coupling effect. - Introduce the influence of mechanics on thermal effects by assuming internal heat generation. - Integrate the new thermo - mechanical coupling relationship into the ABAQUS© finite element code as a user - defined material (UMAT) module. - Provide a method for calibrating model parameters based on experimental data, especially for SiC/SiC materials developed by the SAFRAN group. ### Key points of the solution - **Thermo - mechanical coupling**: The new model considers the influence of temperature changes on the mechanical behavior of materials by adding the linear coefficient of thermal expansion, and simulates the influence of mechanics on thermal effects by assuming internal heat generation due to residual strain. - **Numerical implementation**: An algorithm similar to that of Genet et al. (2013) is adopted, which includes nested fixed - point iterations and Newton - Raphson iterations. The former is used to calculate the damage state, and the latter is used to solve the nonlinear state equations. In addition, a radial return algorithm is used for the residual strain part of the total strain. - **Parameter calibration**: The method proposed by Letombes (2005) is extended to calibrate the parameters of the CMC material model based on the experimental data in the public literature. ### Application verification The effectiveness of the model in capturing the nonlinear and coupled thermo - mechanical behaviors of SiC/SiC materials is verified through simple tensile, compressive, and cyclic loading tests, as well as tests on dog - bone and open - hole specimens. Future work will further extend the CMC material model to include creep, fatigue, and chemo - mechanical coupling effects, which are all problems inherent in high - temperature deformation and degradation.

Modeling the thermo-mechanical behavior of a woven ceramic matrix composite at high temperatures

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Characterisation and damage modelling of oxide/oxide composites considering temperature dependence

Modeling of Coupled Temperature-Displacement-Diffusion Problem for Silica-Phenolic Composite under High Temperature

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

Theoretical model to predict the fracture strength of fiber-reinforced ceramic matrix composites at elevated temperatures

A hierarchical multiscale model for the elastic-plastic damage behavior of 3D braided composites at high temperature

Thermomechanical-induced cracking model for ceramic matrix composite laminates subjected to thermal gradients and transients

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

Effects of In-Plane Extension on Transverse Thermal Conductivity of a Carbon–carbon 8-Harness Satin Weave Composite

High-fidelity prediction and temperature-rise mechanism for low-velocity impact of triaxially braided composites

Parametric Influences of Geometric Dimensions on High Temperature Mechanical Behaviors and Damage Mechanisms of Ceramic Matrix Composite and Superalloy Double Bolted Joints

Experimental and numerical investigation of progressive damage and failure behavior for 2.5D woven alumina fiber/silica matrix composites under a complex in-plane stress state

Thermo-elastic properties in short fibre reinforced ultra-high temperature ceramic matrix composites: Characterisation and numerical assessment

Modeling Multiple-Step Loading Damage Evolution in Continuous Fiber-Reinforced Ceramic-Matrix Composites at Room and Elevated Temperatures

An elastoplastic mechanical-thermal model for temperature rise simulation of two-dimensional triaxially braided composites under quasi-static loads

Influence of Applied In-Plane Strain on Transverse Thermal Conductivity of 0°/90° and Plain Weave Ceramic Matrix Composites

Dual-phase-lag Heat Conduction and Associate Fracture Mechanics of a Ceramic Fiber/matrix Composite Cylinder

A micromechanical damage model for oxide/oxide ceramic matrix composites with hierarchical porosity under thermomechanical loading

An analytical model for the high temperature fracture strength of SiC fiber reinforced ceramic matrix composites considering oxidation and residual thermal stresses

Micromechanical Modeling Tensile and Fatigue Behavior of Fiber-Reinforced Ceramic-Matrix Composites Considering Matrix Fragmentation and Closure