Abstract:An anisotropic elastic-damage coupled constitutive model for plain concrete is developed, which describes the concrete performance degradation. The damage variable, related to the surface density of micro-cracks and micro-voids, and represented by a second order tensor, is governed by the principal tension strain components. For adequately describing the partial crack opening closure effect under tension and compression for concrete, a new suitable thermodynamic potential is proposed to express the state equations for modeling the mechanical behaviors. Within the framework of thermodynamic potential, concrete strain mechanisms are identified in the proposed anisotropic damage model while each state variable is physically explained and justified. The strain equivalence hypothesis is used for deriving the constitutive equations, which leads to the development of a decoupled algorithm for effective stress computation and damage evolution. Additionally, a detailed numerical algorithm is described and the simulations are shown for uni-axial compression, tension and multi-axial loadings. For verifying the numerical results, a series of experiments on concrete were carried out. Reasonably good agreement between experimental results and the predicted values was observed. The proposed constitutive model can be used to accurately model the concrete behaviors under uni-axial compression, tension and multiaxial loadings. Additionally, the presented work is expected to be very useful in the nonlinear finite element analysis of large-scale concrete structures.

A New Anisotropic Damage Model for Ceramic Matrix Composites

Damage Modeling of Oxide/oxide Ceramic Matrix Composites under Cyclic Loading Conditions

A micromechanical damage model for oxide/oxide ceramic matrix composites with hierarchical porosity under thermomechanical loading

Constitutive model and failure criterion for orthotropic ceramic matrix composites under macroscopic plane stress

Basis of Anisotropic Damage Mechanics

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Isotropic Elasto-Plastic Damage Mechanics

Development and validation of damage and failure models for the design of ceramic matrix composite components

A Thermodynamically Consistent Anisotropic Continuum Damage Mechanics Model With Damage-Dependent Equivalent Strain

A constitutive model for the mechanical behavior of a 3D C/C composite

An approach to model mechanical damage in particulate composites with viscoelastic matrix

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

Basis of Isotropic Damage Mechanics

A Novel Elastoplastic Constitutive Model for Woven Oxide/oxide Ceramic Matrix Composites with Anisotropic Hardening

Noninteractive Macroscopic Reliability Model for Ceramic Matrix Composites With Orthotropic Material Symmetry

In Situ Observation and Modeling of Damage Modes in Cross-Ply Ceramic Matrix Composites

A coupled ductile damage model for metal matrix composites: Development and application

Modeling the thermo-mechanical behavior of a woven ceramic matrix composite at high temperatures

Characterisation and damage modelling of oxide/oxide composites considering temperature dependence

An anisotropic, brittle damage model for finite strains with a generic damage tensor regularization

Modeling Tensile Damage and Fracture Behavior of Fiber-Reinforced Ceramic-Matrix Minicomposites