Abstract:<p>In this study, a finite cyclic elasto-plastic constitutive model is developed to simulate the cyclic hardening and softening of the low-yield-point steel BLY160. Compared with existing models, an improved description of the stress-strain hysteresis loops is achieved by introducing a modified Chaboche kinematic hardening rule and a nonlinear isotropic hardening rule extended with a strain memory surface. In the proposed kinematic hardening rule, the backstress is decomposed into three parts for short, middle, and long ranges, with each of them obeying an Armstrong-Frederick (A-F) evolution rule consisting of a linear hardening and dynamic recovery term. To incorporate the significant effect of the kinematic hardening rule on the shape change in hysteresis loops, a dynamic recovery coefficient is postulated herein to develop with not only the accumulated plastic strain but also the memorized strain range. In addition, a hardening factor is introduced to the linear hardening term to consider the different plastic moduli of monotonic and cyclic deformations. The model parameters are identified in an exquisite manner by discriminating the contributions of the isotropic and kinematic components to the cyclic hardening and softening phenomena, which is implemented through a quantitative evaluation of the tested hysteresis loops. The comparison between the numerical prediction and experimental results indicates that the developed constitutive model can elaborately simulate the cyclic behaviour of the investigated steel. The results demonstrate that the entire evolution process of the stress-strain hysteresis curve characterized by the cyclic hardening and softening, transient Bauschinger effect, and strain-range dependence can be adequately described by the proposed model.</p>

A Novel Elastoplastic Constitutive Model for Woven Oxide/oxide Ceramic Matrix Composites with Anisotropic Hardening

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Damage Modeling of Oxide/oxide Ceramic Matrix Composites under Cyclic Loading Conditions

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

A micromechanical damage model for oxide/oxide ceramic matrix composites with hierarchical porosity under thermomechanical loading

Constitutive modeling of two-phase metallic composites with application to tungsten-based composite 93W-4.9Ni-2.1Fe

An improved elasto-plastic constitutive model for the exquisite description of stress-strain hysteresis loops with cyclic hardening and softening effects

Constitutive model and failure criterion for orthotropic ceramic matrix composites under macroscopic plane stress

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

A New Anisotropic Damage Model for Ceramic Matrix Composites

Simulation of Mechanical Behaviors of Ceramic Composites Under Stress-Oxidation Environment While Considering the Effect of Matrix Cracks

Characterisation and damage modelling of oxide/oxide composites considering temperature dependence

Development and validation of damage and failure models for the design of ceramic matrix composite components

A Constitutive Law Modelling the Mixed Hardening Behavior of Particle-Reinforced Composites

A plasticity-based dynamic constitutive model for ultra high toughness cementitious composites

A three-dimensional elastoplastic constitutive model incorporating Lode angle dependence

High-temperature constitutive model for three-dimensional needled C/C-SiC composite under tensile loading

An analytical model for the high temperature fracture strength of SiC fiber reinforced ceramic matrix composites considering oxidation and residual thermal stresses

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

A Coupled Elastoplastic Damage Model for Clayey Rock and Its Numerical Implementation and Validation