Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

In Situ Observation and Modeling of Damage Modes in Cross-Ply Ceramic Matrix Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Development and validation of damage and failure models for the design of ceramic matrix composite components

Micromechanical Modeling Tensile and Fatigue Behavior of Fiber-Reinforced Ceramic-Matrix Composites Considering Matrix Fragmentation and Closure

A Quantitative Representation of Damage and Failure Response of 3D Textile SiC/SiC Ceramics Matrix Composites Subjected to Flexural Loading

In Situ Damage Propagation and Fracture in Notched Cross-Ply SiC/SiC Composites: Experiment and Numerical Modeling

Damage Evolution and Multi-Scale Analysis of Carbon Fiber-Reinforced Cross-Ply Laminate with Thermal Residual Stress

Damage and failure analysis of a SiCf/SiC ceramic matrix composite using digital image correlation and acoustic emission

A micromechanical damage model for oxide/oxide ceramic matrix composites with hierarchical porosity under thermomechanical loading

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

Effect of Stochastic Loading on Tensile Damage and Fracture of Fiber-Reinforced Ceramic-Matrix Composites

Modeling Tensile Damage and Fracture Behavior of Fiber-Reinforced Ceramic-Matrix Minicomposites

Simulation Study of the Damage Mechanisms Appearing in a Cross Ply Composite Material Loaded in Uniaxial Tension

In situ Observation of Compression Damage in a Three-Dimensional Braided Carbon Fiber Reinforced Carbon and Silicon Carbide (C/C-SiC) Ceramic Composite

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Effects of Micro-Damage on the Nonlinear Constitutive Behavior of SiC / SiC Minicomposites

Failure Modes and Toughening Mechanisms in CMC

Real-Time Observation of Damage Nucleation in Three-Dimensionally Reinforced Carbon/Carbon Composites and Role of Bundle/Matrix Interface

Micromechanical modeling of loading rate–dependent tensile damage and fracture behavior in fiber-reinforced ceramic-matrix composites

Tensile Damage Evolution and Mechanical Behaviour of SiCf/SiC Mini-Composites Through 4D In-Situ Micro-Ct and Data-Driven Modelling