Abstract:In this study, integrated experimental tests and computational modeling are proposed to investigate the failure mechanisms of open-hole cross-ply carbon fiber reinforced polymer (CFRP) laminated composites. In particular, we propose two effective methods, which include width-tapered double cantilever beam (WTDCB) and fixed-ratio mixed-mode end load split (FRMMELS) tests, to obtain the experimental data more reliably. We then calibrate the traction-separation laws of cohesive zone model (CZM) used among laminas of the composites by leveraging these two methods. The experimental results of fracture energy, i.e. G Ic and G Tc , obtained from WTDCB and FRMMELS tests are generally insensitive to the crack length thus requiring no effort to accurately measure the crack tip. Moreover, FRMMELS sample contains a fixed mixed-mode ratio of G IIc /G Tc depending on the width taper ratio. Examining comparisons between experimental results of FRMMELS tests and failure surface of B-K failure criterion predicted from a curve fitting, good agreement between the predictions and experimental data has been found, indicating that FRMMELS tests are an effective method to determine mixed-mode fracture criterion. In addition, a coupled experimental-computational modeling of WTDCB, edge notched flexure, and FRMMELS tests are adopted to calibrate and validate the interfacial strengths. Finally, failure mechanisms of open-hole cross-ply CFRP laminates under flexural loading have been studied systematically using experimental and multi-scale computational analyses based on the developed CZM model. The initiation and propagation of delamination, the failure of laminated layers as well as load-displacement curves predicted from computational analyses are in good agreement with what we have observed experimentally.

Micro Failure Analysis of Fiber Metal Laminates

Progressive failure analysis of 2D woven composites at the meso-micro scale

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Failure Analysis of Composite Laminate under Low-Velocity Impact Based on Micromechanics of Failure

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Progressive failure of laminated composites with a hole under compressive loading based on micro-mechanics

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

A Study of Failure Strength for Fiber-Reinforced Composite Laminates with Consideration of Interface

Initial and Final Failure Strength Analysis of Composites Based on a Micromechanical Method

Numerical simulation of pin-loaded joints of fiber metal laminate

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

An efficient micromechanics-based finite element model for failure analysis of laminated composites

Behaviors of Composite Laminates under Low-Energy Impact Using a Novel Analytical Framework

Progressive Damage and Failure Modeling in Fiber-Reinforced Laminated Composites Containing a Hole

Application of Energy Dissipation Approach for Notched Behavior in Fiber Metal Laminates

Residual tension behavior and damage evolution mechanisms of fiber metal laminates with various low-velocity impacted damage

A High-Efficient Model for Interface Debonding Analysis of Carbon Fiber-Reinforced Polymer Composite

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading