Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

Simulation Study of the Damage Mechanisms Appearing in a Cross Ply Composite Material Loaded in Uniaxial Tension

Progressive failure analysis of 2D woven composites at the meso-micro scale

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

Meso-Scale Damage Modeling of Hybrid 3D Woven Orthogonal Composites under Uni-Axial Compression

Numerical Investigation on the Repeated Low-Velocity Impact Behavior of Composite Laminates

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Compressive Experiment and Damage Simulation of A Composite Structure with Ply Drop-Off

On the experimental determination and prediction of damage evolution in composites via cyclic testing

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites

A Multi-Scale Modeling Scheme for Damage Analysis of Composite Structures Based on the High-Fidelity Generalized Method of Cells

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Numerical Tensile Damage Procedure Analysis of Angle-Ply Laminate Using Multi-Scale RVEs with Smear Crack Models

Mesoscale Modelling of Progressive Damage and Failure in Single-Lap and Double-Lap Thin-Ply Laminated Composite Bolted Joints

On Inter-Relationships of Elastic Moduli and Strains in Crossply Laminated Composites

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

Multiscale damage modelling of 3D woven composites under static and impact loads

Mesoscale Model for Composite Laminates: Verification and Validation on Scaled Un-notched Laminates

Numerical Simulation of Transverse Crack on Composite Structure Using Cohesive Element

Analytical model for determining effective stiffness and mechanical behavior of polymer matrix composite laminates using continuum damage mechanics