Effect of residual stresses on the mechanical properties of Ti-TiAl laminate composites fabricated by hot-pack rolling

Wei Sun,Fenghai You,Fantao Kong,Xiaopeng Wang,Yuyong Chen

DOI: https://doi.org/10.1016/j.matchar.2020.110394

IF: 4.537

2020-08-01

Materials Characterization

Abstract:<p>The Ti-TiAl laminate composites with different titanium alloy volume fraction were successfully designed and fabricated by hot-pack rolling. Due to the mismatch of coefficient of thermal expansion (CTE), the composites show pronounced residual stresses. The TiAl alloy possesses residual tensile stress while the titanium alloy possesses residual compressive stress. With the increase of titanium alloy volume fraction, the residual compressive stress is decreased but the residual tensile stress is opposite. The residual compressive stress is beneficial for improving the mechanical properties of Ti-TiAl laminate composites, which is because it enhances the strength and postpones the rupture of composites during tensile test. The higher residual compressive stress also improves the fracture toughness of composites by extending crack propagation. The composite with 42 vol% titanium alloy shows the optimal comprehensive mechanical properties, which is higher than most of other Ti-Al based metal-intermetallic laminate composites.</p>

materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the influence of residual stress on the mechanical properties of Ti - TiAl laminated composites with different titanium alloy volume fractions manufactured by hot - pack rolling. Specifically, the paper focuses on the following aspects:

1. **Generation of Residual Stress**: Due to the mismatch of the coefficient of thermal expansion (CTE) between titanium alloy and TiAl alloy, significant residual stress will be generated during the hot - pack rolling process. How these residual stresses affect the mechanical properties of the composite is a key issue.

2. **Distribution and Magnitude of Residual Stress**: How does the distribution and magnitude of residual stress change with the change of titanium alloy volume fraction? In particular, mainly residual compressive stress exists in titanium alloy, while mainly residual tensile stress exists in TiAl alloy.

3. **Optimization of Mechanical Properties**: What are the differences in tensile properties, fracture toughness and fracture behavior of Ti - TiAl laminated composites with different titanium alloy volume fractions at room temperature and high temperature? Is there an optimal titanium alloy volume fraction that enables the composite to have the best comprehensive mechanical properties?

4. **Relationship between Microstructure and Properties**: How does the microstructure of the composite (such as grain size, phase composition, etc.) affect its mechanical properties? In particular, what is the influence mechanism of microstructure change on properties under different titanium alloy volume fractions?

Through a systematic study of these problems, the paper aims to provide theoretical basis and technical support for the design and manufacture of high - performance Ti - TiAl laminated composites.