Abstract:Surface modification of Ar plasma-pretreated SiLK film coating on a (100)-oriented silicon wafer (SiLK-Si substrate) via UV-induced graft copolymerization with 4-vinylpyridine (the 4VP-g-SiLK-Si surface) or 1-vinylimidazole (the VIDz-g-SiLK-Si surface! was carried out to promote the adhesion with the electrolessly deposited copper. The surface composition of the graft-copolymerized SiLK-Si substrates was characterized by X-ray photoelectron spectroscopy. The topography of the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces was investigated by atomic force microscopy. The 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces could be activated by PdCl2 in the absence of prior sensitization by SnCl2 (the Sn-free activation process! for the subsequent electroless deposition of copper. The 180degrees-peel adhesion strength of the electrolessly deposited copper on the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces reaches about 6 and 5 N/cm, respectively. These adhesion strength values were much higher than those of the electrolessly deposited copper on the pristine and Ar plasma-treated SiLK-Si surfaces. The strong adhesion of the electrolessly deposited copper to the VIDz-g-SiLK-Si and 4VP-g- SiLK-Si surfaces was attributed to the synergistic effect of the strong interaction between the pyridine or imidazole functional groups of the grafted polymers with copper atoms, the spatial distribution of the graft chains on the SiLK surface and into the metal matrix, and the fact that the graft chains were covalently tethered on the SiLK surface. (C) 2002 The Electrochemical Society.

Co2 Laser Induced Blind-Via for Direct Electroplating

Wetting Process of Copper Filling in Through Silicon Vias

Influence of Electroplating Current Density on Through Silicon Via Filling

Copper Induced Direct CO2 Laser Drilling Blind Hole with the Aid of Brown Oxidation for PCB CCL

Electrochemical Analysis of Cathode in TSV Copper Electroplating

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Direct copper plating on ultra-thin sputtered cobalt film in an alkaline bath

A Parameters Optimization of the CO2 Laser Drilling Process for HDI Microvia Fabrication

Factors governing filling of blind via and through hole in electroplating

Study on thin surface copper technology in blind via iflling plating

The laser drilling of high density interconnect (HDI) technology manufacture and application

Effect of Copper Sulfate and Sulfuric Acid on Blind Hole Filling of HDI Circuit Boards by Electroplating

Effects Of Additives On Filling Blind Vias For Hdi Manufacture

Copper electroplating technology for microvia filling

Experiment Study of Laser Thermal Enhanced Electrochemical Deposition

Study on the technology of simultaneous through-hole metallization and blind hole filled copper

Copper Pulse-Reverse Current Electrodeposition to Fill Blind Vias for 3-D Tsv Integration

Failure investigation on copper-plated blind vias in PCB

Through-silicon Via Filling Process Using Pulse Reversal Plating

Research on blind via drilling using UV laser

The Influence of Ultrasonic Agitation on Copper Electroplating of Blind-Vias for SOI Three-Dimensional Integration