Abstract:The impact of the boundary plane and impurity contamination on the recombination activity of Sigma3 boundaries in multicrystalline silicon (mc-Si) was studied by means of electron-beam-induced current (EBIC) technique. In the as-grown contamination-free mc-Si, the EBIC contrast of different Sigma3 boundaries was in the order of Sigma3{111}<Sigma3{110}<Sigma3{112}. This order may be attributed to the difference in the defect density of the Sigma3 boundaries due to the effect of the boundary plane. But the maximum EBIC contrast did not exceed 2% at 300 K, suggesting that the Sigma3 boundaries are originally electrically inactive and the boundary plane has no significant effect on their recombination activity. When contaminated with Fe at 900 degreesC, the EBIC contrasts of the Sigma3{110} and Sigma3{112} increased at 300 K, whereas that of the Sigma3{111} was still weak (<3%). This variation in the EBIC contrast may be related to the effect of boron and it is also indicated that the Sigma3{111} has the weakest gettering ability. When contaminated with Fe at 1100 degreesC, the EBIC contrasts of all the Sigma3 boundaries continued to increase and bright-denuded zones developed around the boundaries. The Sigma3 boundaries in the 1100 degreesC air-cooled mc-Si showed stronger EBIC contrasts and broader denuded zones than those in the 1100 degreesC quenched one. This phenomenon was explained in terms of the precipitation of Fe. The precipitation of Fe at grain boundaries (GBs) was affected by both the GB type and cooling rate, that is, Fe is easier to form precipitates onto the Sigma3{110} and Sigma3{112} boundaries during slow cooling. (C) 2005 American Institute of Physics.

Influence of Metal Impurities on Recombination Activity of Dislocations in Multicrystalline Silicon

Electron-beam-induced Current Study of Grain Boundaries in Multicrystalline Si

Recombination behavior of nickel in cast multicrystalline silicon

Recombination Activity Of Sigma 3 Boundaries In Boron-Doped Multicrystalline Silicon: Influence Of Iron Contamination

The characterization of high quality multicrystalline silicon by the electron beam induced current method

Electron-beam-induced current study of hydrogen passivation on grain boundaries in multicrystalline silicon: Influence of GB character and impurity contamination

The dislocation distribution characteristics of a multi-crystalline silicon ingot and its impact on the cell efficiency

Precipitation of Cu and Fe impurities on dislocations in Czochralski-grown silicon

Electron-beam-induced current study of grain boundaries in multicrystalline silicon

Carrier Recombination Activities and Structural Properties of Small-Angle Boundaries in Multicrystalline Silicon

Precipitation of Cu and Fe in Dislocated Floating-Zone-Grown Silicon

Effect of Fe impurity on the dislocations in 4H-SiC: Insights from electrical and optical characterization

Dislocation assisted face-centered-cubic/body-centered-cubic interface mixing during severe plastic deformation

Influence of Nickel Precipitation on the Formation of Denuded Zone in Czochralski Silicon

Precipitation of Cu, Ni and Fe on Frank-Type Partial Dislocations in Czochralski-Grown Silicon

Electrical Activity of Frank Partial Dislocations and the Influence of Metallic Impurities in Czochralski-Grown Silicon

The Nature of a Low Angle Grain-Boundary in a Si Bi-Crystal with Added Fe Impurities

Effect of Point Defects on the Recombination Activity of Copper Precipitates in P-Type Czochralski Silicon

Competitive Role of Impurities on the Electrical Activity of As-Grown Σ=13, Σ=25 and Deformed Σ=9 Grain Boundaries in P-Type Silicon Bi-crystals

Atomistic modeling of metal-nonmetal interphase boundary diffusion

Influence of Defects and Impurities on the Deteriorated Border Region in Multicrystalline Silicon Ingots