Abstract:The mechanical properties of Czochralski (Cz) silicon wafers dictate fundamental limits on the fabrication of diverse electronic devices. Certain impurities with sufficiently high concentrations may affect the mechanical properties of Cz silicon. The underlying mechanisms for such influences have been being explored in the past decades. In this work, the effects of antimony (Sb)- and tin (Sn)-doping at 1018 cm−3 level on the mechanical properties of Czochralski (Cz) silicon have been comparatively investigated. Since Sb and Sn have quite close tetrahedral covalent radii in silicon, the lattice strains resulted from Sb- and Sn-doping and their consequent effects on the mechanical properties of silicon are approximately identical. In silicon, Sb is an electrically active impurity while Sn is a neutral one. Therefore, the present work can essentially reveal the role of electrical activity of Sb playing in the mechanical properties of Cz silicon. It is found that Sb-doped Cz (Sb-Cz) silicon possesses a slightly higher hardness than Sn-doped Cz (Sn-Cz) silicon. Moreover, the dislocation gliding at 500 or 600 °C in Sb-Cz silicon requires a much larger critical resolved shear stress than that in Sn-Cz silicon. At such two temperatures, Sb-Cz silicon remains to be n-type in electrical conduction. The aforementioned two results are believed to be ascribed to the resistance of dislocation motion by the Coulomb interaction between the positively charged Sb ions and the dislocations that are deep-level acceptors thus being negatively charged in Sb-Cz silicon. As the temperature is increased to 700 °C and above, the dislocation gliding in Sb-Cz silicon is not substantially different from that in Sn-Cz silicon. At such elevated temperatures, Sb-Cz silicon becomes intrinsic in electrical conduction like Sn-Cz silicon. In this context, there is no Coulomb interaction between Sb ions and dislocations anymore to impede the dislocation gliding in Sb-Cz silicon. In addition, it is found that the indentation fracture toughness of Sb-Cz is almost the same as that of Sn-Cz silicon. Actually, the fracture of silicon is essentially a cleavage process, to which the electrical activity of Sb is irrelevant.

Recombination Activity Of Sigma 3 Boundaries In Boron-Doped Multicrystalline Silicon: Influence Of Iron Contamination

Electron-beam-induced Current Study of Grain Boundaries in Multicrystalline Si

Electron-beam-induced current study of grain boundaries in multicrystalline silicon

The characterization of high quality multicrystalline silicon by the electron beam induced current method

Carrier Recombination Activities and Structural Properties of Small-Angle Boundaries in Multicrystalline Silicon

Electron-beam-induced current study of hydrogen passivation on grain boundaries in multicrystalline silicon: Influence of GB character and impurity contamination

Recombination behavior of nickel in cast multicrystalline silicon

Role of Grain Boundary Character on Bi Segregation-Induced Embrittlement in Ultrahigh-Purity Copper

Influence of Metal Impurities on Recombination Activity of Dislocations in Multicrystalline Silicon

The Nature of a Low Angle Grain-Boundary in a Si Bi-Crystal with Added Fe Impurities

Effects of Antimony- and Tin-Doping on the Mechanical Propertiesof Czochralski Silicon: Revealing the Role of Electrical Activity of Antimony

First-principles Investigation into the Effect of Cr on the Segregation of Multi-H at the Fe Σ3 (111) Grain Boundary

Electrical/Optical Activities of Grain Boundaries in Multicrystalline Si

Influence of boron on the properties of intrinsic microcrystalline silicon thin films

Influence of Defects and Impurities on the Deteriorated Border Region in Multicrystalline Silicon Ingots

Impact of Cu Contamination on the Electrical Properties of A Direct Silicon Bonded (110)/(100) Interfacial Grain Boundary

Recombination Activity of Sub-Grain Boundaries and Dislocation Arrays in Quasi-Single Crystalline Silicon

(Invited) Defects in Cast-Mono Crystalline Silicon

Defect Control Based on Constitutional Supercooling Effect in Cast Multicrystalline Silicon: Boron-indium Co-Doping

Grain Boundary Engineering of High Performance Multicrystalline Silicon: Control of Iron Contamination at the Ingot Edge

Modulation of Electrical Characteristics at a Ni-contaminated Silicon Grain Boundary by Engineering the Metal Precipitates