Abstract:The impact of the boundary plane and impurity contamination on the recombination activity of Sigma3 boundaries in multicrystalline silicon (mc-Si) was studied by means of electron-beam-induced current (EBIC) technique. In the as-grown contamination-free mc-Si, the EBIC contrast of different Sigma3 boundaries was in the order of Sigma3{111}<Sigma3{110}<Sigma3{112}. This order may be attributed to the difference in the defect density of the Sigma3 boundaries due to the effect of the boundary plane. But the maximum EBIC contrast did not exceed 2% at 300 K, suggesting that the Sigma3 boundaries are originally electrically inactive and the boundary plane has no significant effect on their recombination activity. When contaminated with Fe at 900 degreesC, the EBIC contrasts of the Sigma3{110} and Sigma3{112} increased at 300 K, whereas that of the Sigma3{111} was still weak (<3%). This variation in the EBIC contrast may be related to the effect of boron and it is also indicated that the Sigma3{111} has the weakest gettering ability. When contaminated with Fe at 1100 degreesC, the EBIC contrasts of all the Sigma3 boundaries continued to increase and bright-denuded zones developed around the boundaries. The Sigma3 boundaries in the 1100 degreesC air-cooled mc-Si showed stronger EBIC contrasts and broader denuded zones than those in the 1100 degreesC quenched one. This phenomenon was explained in terms of the precipitation of Fe. The precipitation of Fe at grain boundaries (GBs) was affected by both the GB type and cooling rate, that is, Fe is easier to form precipitates onto the Sigma3{110} and Sigma3{112} boundaries during slow cooling. (C) 2005 American Institute of Physics.

Recombination Activity of Sub-Grain Boundaries and Dislocation Arrays in Quasi-Single Crystalline Silicon

(Invited) Defects in Cast-Mono Crystalline Silicon

Controlling Dislocation Gliding and Propagation in Quasi-Single Crystalline Silicon by Using <110>-Oriented Seeds

Silicon Rich Carbide As A Conductive Substrate For Si Qd Solar Cells

Silicon Quantum Dot Based Solar Cells: Addressing the Issues of Doping, Voltage and Current Transport

Electron-beam-induced Current Study of Grain Boundaries in Multicrystalline Si

The dislocation distribution characteristics of a multi-crystalline silicon ingot and its impact on the cell efficiency

Carrier Recombination Activities and Structural Properties of Small-Angle Boundaries in Multicrystalline Silicon

Designing Functional Σ13 Grain Boundaries at Seed Junctions for High-Quality Cast Quasi-Single Crystalline Silicon

The Nature of a Low Angle Grain-Boundary in a Si Bi-Crystal with Added Fe Impurities

Recombination Activity Of Sigma 3 Boundaries In Boron-Doped Multicrystalline Silicon: Influence Of Iron Contamination

Dislocation formation in seeds for quasi-monocrystalline silicon for solar cells

Grown-in Defects in Heavily Phosphorus-Doped Czochralski Silicon

Grain Boundary Development of Silicon during Directional Solidification: A Phase-Field Study

Grain Boundary Engineering of High Performance Multicrystalline Silicon: Control of Iron Contamination at the Ingot Edge

Electron-beam-induced current study of grain boundaries in multicrystalline silicon

Misorientation and Temperature Dependence of Small Angle Twist Grain Boundaries in Silicon: Atomistic Simulation of Directional Growth

Reduction of trapping and recombination in upgraded metallurgical grade silicon: Impact of phosphorous diffusion gettering

Dislocation determination and quality control of industrial casting monocrystalline silicon

The impact of interface recombination on the external quantum efficiency of silicon solar cells

Control of Dislocation Clusters by Artificially-Introduced Micro-Twins in Cast-Mono Silicon