Abstract:Ultra-precision thinning technology using workpiece self-rotational grinding followed by chemical mechanical polishing (CMP) is extensively applied in the integrated circuit manufacturing process, which enables to obtain large size ultra-thin silicon wafers with high material removal rate and low damage layer thickness. However, an in-depth understanding of the influence caused by ground surface topography on material removal mechanism in silicon CMP process has not been revealed yet. This work systematically investigates the contact characteristics of the wafer-pad interface and corrosion behaviors of the ground silicon wafer immersed in polishing solution. Firstly, some silicon wafers are ground using different wheels and subsequently polished. The material removal depth during the whole CMP process is measured. Then, the intrinsic model of polishing pad is determined via mechanical property tests. A finite element method is adopted to evaluate the contact status, displacement distortion and stress distribution at the contact region between pad and ground wafer surface. Moreover, the chemical reaction mechanism between ground silicon wafer and polishing solution is revealed by utilizing X-ray photoelectron spectroscopy and electrochemical analysis. The influence of wafer surface topography on corrosion resistance in CMP process is illustrated. Finally, corresponding experimental results are explained from an atomic scale by a ReaxFF reactive molecular dynamics simulation model. This presented study demonstrates the corrosion promotion principle of ground silicon wafer in CMP process.

Wafer bending/orientation characterization and their effects on fluid lubrication during chemical mechanical polishing

Experimental Studies on Interfacial Fluid Lubrication and Wafer Status During Chemical Mechanical Polishing of 12-Inch Wafer

Effect of Zone Pressure on Wafer Bending and Fluid Lubrication Behavior During Multi-Zone Cmp Process

In Situ Measurement of Fluid Pressure at the Wafer-Pad Interface During Chemical Mechanical Polishing of 12-Inch Wafer

Effects of the Polishing Variables on the Wafer-Pad Interfacial Fluid Pressure in Chemical Mechanical Polishing of 12-Inch Wafer

Comparative Study of the Lubricating Behavior Between 12-In. Copper Disk and Wafer During Chemical Mechanical Polishing

Analysis on Contact and Flow Features in CMP Process

Analysis on Pad Effects in Chemical Mechanical Polishing

Wafer Back Pressure Control and Optimization in the Cmp Process

Modeling Chemical Mechanical Polishing with Couple Stress Fluids

Effects of grinding-induced surface topography on the material removal mechanism of silicon chemical mechanical polishing

Numerical and Experimental Investigation on Multi-Zone Chemical Mechanical Planarization

Contact Stress Non-Uniformity of Wafer Surface for Multi-Zone Chemical Mechanical Polishing Process

Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishing

Investigation of Material Removal Mechanism of Silicon Wafer in the Chemical Mechanical Polishing Process Using Molecular Dynamics Simulation Method

Research on Surface Topography of Silicon Wafer in Chemical-mechanical Polishing

Chemical effects on the tribological behavior during copper chemical mechanical planarization

Characterization of Pad–Wafer Contact Area and Distance in Chemical-Mechanical Polishing

Optical and Mechanical Characterization of Chemical Mechanical Planarization Pad Surfaces

Contribution of Porous Pad to Chemical Mechanical Polishing

Wear phenomena in chemical mechanical polishing