Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Effect of Ni3+ Concentration on the Resistive Switching Behaviors of Nio Memory Devices

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Effects of stress on resistive switching property of the NiO RRAM device

Effect of Annealing Temperature for Ni/AlOx/Pt RRAM Devices Fabricated with Solution-Based Dielectric

Temperature Dependence of Electrical Properties and Conduction Mechanism of SiN<sub>x</sub>‐based RRAM

Improvement of Resistive Switching Characteristics in Zinc Oxide-Based Resistive Random Access Memory by Ammoniation Annealing

Temperature Dependence of Electrical Properties and Conduction Mechanism of SiN<sub><i>x</i></sub>-Based Resistive Random Access Memory

Resistive Switching Characteristics of Zno Based Rerams with Different Annealing Temperatures

Effects of annealing temperatures on resistive switching characteristics of TiO2 based ReRAM

Effects of Electrode Materials on Bipolar and Unipolar Switching in NiO Resistive Switching Device

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Impact of Ni Concentration on the Performance of Ni Silicide/HfO 2 /TiN Resistive RAM (RRAM) Cells

Enhancing Resistive Switching in AlN-Based Memristors Through Oxidative Al2O3 Layer Formation: A Study on Preparation Techniques and Performance Impact

Characteristics of Ni/AlOx/Pt RRAM Devices with Various Dielectric Fabrication Temperatures

Nitrogen-induced improvement of resistive switching uniformity in a HfO2-based RRAM device

Resistive Switching Behavior of Solution-Processed AlOx, based RRAM with Ni and TiN Top Electrode at Low Annealing Temperatures

In Situ Observation of Nickel As an Oxidizable Electrode Material for the Solid-Electrolyte-Based Resistive Random Access Memory

Temperature Dependence of Resistive Switching Behavior in α-Ga2O3-Based RRAM Devices

Enhanced Resistive Switching Performance of Spinel MnCo2O4 Resistive Random Access Memory Devices: Effects of Annealing Temperatures and Annealing Atmospheres

Optimization of Resistance Switching Effect Based on Semiconductor Material Tin

Investigations of Conduction Mechanisms of the Self-Rectifying N+si-Hfo2–ni RRAM Devices