Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Effect of Annealing Temperature for Ni/AlOx/Pt RRAM Devices Fabricated with Solution-Based Dielectric

Characteristics of Ni/AlOx/Pt RRAM Devices with Various Dielectric Fabrication Temperatures

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Resistive Switching Behavior of Solution-Processed AlOx, based RRAM with Ni and TiN Top Electrode at Low Annealing Temperatures

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Self-Compliance and High Performance Pt/HfO<sub>x</sub>/Ti RRAM Achieved through Annealing

Effects of annealing temperatures on resistive switching characteristics of TiO2 based ReRAM

Resistive switching behavior of solution-processed AlOx and GO based RRAM at low temperature

Performance Variation of Solution-Processed Memristor Induced by Different Top Electrode

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Effects of Annealing Conditions on Resistive Switching Characteristics of SnOx Thin Films

Effect of Ni3+ Concentration on the Resistive Switching Behaviors of Nio Memory Devices

The annealing temperature dependence of the RRAM effect and the oxygen vacancy mechanism for double perovskite Bi 2 FeCrO 6 film

Optimization of the Cycle Numbers of TiO2 Resistive Random-Access Memory Devices by Annealing

Optimization of the Cycle Numbers of TiO 2 Resistive Random-Access Memory Devices by Annealing

Effect of Rapid Thermal Annealing on Resistive Switching Uniformity of HfAlOx Based RRAM Devices

Effect of Annealing Conditions on Resistive Switching in Hafnium Oxide-based MIM Devices for Low-power RRAM

Improvement of Resistive Switching Characteristics in Zinc Oxide-Based Resistive Random Access Memory by Ammoniation Annealing

Dielectric Properties and Carrier Transport Mechanism in Annealed HfOx‐Based Resistive Random Access Memory Devices

Temperature Dependence of Electrical Properties and Conduction Mechanism of SiN<sub>x</sub>‐based RRAM