Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

The annealing temperature dependence of the RRAM effect and the oxygen vacancy mechanism for double perovskite Bi 2 FeCrO 6 film

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Improved Resistance Switching Characteristics of BiFeO3 Thin Film by Increasing the Annealing Temperature

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Thermal Stability of Resistive Switching Effect in ZnO/BiFeO3 Bilayer Structure

Effect of Annealing Temperature for Ni/AlOx/Pt RRAM Devices Fabricated with Solution-Based Dielectric

The Role of Oxygen Vacancies in the High Cycling Endurance and Quantum Conductance in BiVO 4 ‐based Resistive Switching Memory

Resistive switching properties of amorphous Sm2Ti2O7 thin film prepared by RF sputtering for RRAM applications

Temperature Dependence of Resistive Switching Behavior in α-Ga2O3-Based RRAM Devices

Crystallographic Orientation-Dependent Resistive Switching in Ga2O3 Thin Films

Spinodal Decomposition-Driven Endurable Resistive Switching in Perovskite Oxides

Anatomy of Resistive Switching Behavior in Titanium Oxide Based RRAM Device

Atomic‐Scale Phase Transformation in Perovskite LaCoOx Resistive Switching Memristive Devices

Transition Metal Oxide Thin Films for Nonvolatile Resistive Random Access Memory Applications

Enhanced Resistive Switching Performance of Spinel MnCo2O4 Resistive Random Access Memory Devices: Effects of Annealing Temperatures and Annealing Atmospheres

Ferroelectric Diode-Like Resistive Switching Behavior in Bi0.95Er0.05FeO3/CuFe2O4 Heterostructures for Non-Volatile Memories

Resistive switching behavior of solution-processed AlOx and GO based RRAM at low temperature

Effects of annealing temperatures on resistive switching characteristics of TiO2 based ReRAM

Oxygen vacancy-mediated enhancement of ferroelectric domain wall memory performance at elevated temperatures

Dielectric Properties and Carrier Transport Mechanism in Annealed HfOx‐Based Resistive Random Access Memory Devices