Abstract:The common nonpolar switching behavior of binary oxide-based resistive random access memory devices (RRAMs) has several drawbacks in future application, such as the requirements for a high forming voltage, a large reset current, and an additional access device to settle the sneak-path issue. Herein, we propose the tuning of the switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer, and a case study on Ta2O5-Ta systems is provided. The devices are designed to be Pt/Ta2O5(5 - x/2)/Ta(x)/Ta2O5(5 - x/2)/Pt with x = 0, 2, or 4 nm. The reference devices without the Ta nanolayer exhibit an expected nonpolar switching behavior with a high forming voltage of similar to-4.5 V and a large reset current of >10 mA. In contrast, a self-compliance bipolar switching behavior with a low forming voltage of similar to-2 V and a small reset current of <1 mA is observed after inserting a 2 nm Ta nanolayer. When the Ta nanolayer is increased to 4 nm, a complementary resistive switching (CRS) behavior is found, which can effectively settle the sneak-path issue. The appearance of CRS behavior suggests that a thin Ta nanolayer of 4 nm is robust enough to act as an inner electrode. Besides, the behind switching mechanisms are thoroughly discussed with the help of a transmission electron microscope and temperature-dependent electrical measurements. All these results demonstrate the feasibility of tuning switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer and might help to advance the commercialization of binary oxide-based RRAMs.

Optimization of Resistance Switching Effect Based on Semiconductor Material Tin

CuAg/Al 2 O 3 /cuag Threshold Switching Selector for RRAM Applications

A study of the transition between the non-polar and bipolar resistance switching mechanisms in the TiN/TiO2/Al memory

High-performance Ta2O5-based Resistive Random-Access Memory with Embedded Graphene Quantum Dots and Pt-Ag Composite Active Layer

Influence of Metal Electrode on the Performance of ZnO Based Resistance Switching Memories

Reliable Resistive Switching Behaviour of Ag/Ta2O5/Al2O3/p++-Si Memory Device

Enhancement of Resistive Switching Characteristics of Sol–Gel TiO x RRAM Using Ag Conductive Bridges

Characteristics and Mechanism of Conduction/set Process in TiN∕ZnO∕Pt Resistance Switching Random-Access Memories

Highly Uniform Resistive Switching Characteristics of Tin/Zro2/Pt Memory Devices

Optimization of the Cycle Numbers of TiO 2 Resistive Random-Access Memory Devices by Annealing

Improvement of Resist Ive Switching in Δ-Cspbi 3 Devices by Inserting Carbon Nanotube

Bipolar Resistive Switching Characteristics of HfO2/TiO2/HfO2 Trilayer-Structure RRAM Devices on Pt and TiN-Coated Substrates Fabricated by Atomic Layer Deposition

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Resistive switching and synaptic learning performance of a TiO2 thin film based device prepared by sol–gel and spin coating techniques

The current limit and self-rectification functionalities in the TiO2/HfO2 resistive switching material system

Investigation of Resistive Switching Mechanisms in Ti/TiO<i><sub>x</sub></i>/Pd-Based RRAM Devices

Tuning The Switching Behavior Of Binary Oxide-Based Resistive Memory Devices By Inserting An Ultra-Thin Chemically Active Metal Nanolayer: A Case Study On The Ta2o5-Ta System

Low-Power Resistive Switching Characteristics in TiN/TaON/SiO2/Pt RRAM Devices for Neuromorphic Applications

A Systematic Investigation of TiN/CuxO/Cu RRAM with Long Retention and Excellent Thermal Stability

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Effect of electrode area on resistive switching behavior in translucent solution-processed AlOx based memory device