Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Improvement of Resistive Switching Characteristics in Zinc Oxide-Based Resistive Random Access Memory by Ammoniation Annealing

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Forming-Free HfOx-Based Resistive Memory with Improved Uniformity Achieved by the Thermal Annealing-Induced Self-Doping of Ge

Resistive Switching Characteristics of Zno Based Rerams with Different Annealing Temperatures

Annealed AlOx Film with Enhanced Performance for Bipolar Resistive Switching Memory

Nitrogen-induced improvement of resistive switching uniformity in a HfO2-based RRAM device

Switching Mechanism Transition Induced by Annealing Treatment in Nonvolatile Cu/Zno/Cu/Zno/Pt Resistive Memory: from Carrier Trapping/Detrapping to Electrochemical Metallization

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Effects of Annealing Conditions on Resistive Switching Characteristics of SnOx Thin Films

Nitrogen-Oxyanion-Doped HfO2 Resistive Random-Access Memory with Chemically Enhanced Forming

Conduction Mechanism and Improved Endurance in HfO 2 -Based RRAM with Nitridation Treatment

Low Temperature Improvement Method on ${\rm Zn{:}SiO}_{x}$ Resistive Random Access Memory Devices

Effect of Annealing Temperature for Ni/AlOx/Pt RRAM Devices Fabricated with Solution-Based Dielectric

Resistive switching properties of Mn-doped amorphous Nb2O5 thin films for resistive RAM application

Atomic Layer Deposition of Ga2O3/ZnO Composite Films for High-Performance Forming-Free Resistive Switching Memory.

Improved Memory Characteristics by NH3Post Annealing for ZrO2Based Charge Trapping Nonvolatile Memory

Performance Enhancement of Nonvolatile Resistive Switching Memory device Made from WO<sub>X</sub>/ZnO Bilayer Structure

Improved Performance of HfxZnyO‐Based RRAM and Its Switching Characteristics Down to 4 K Temperature

Improvement of Hafnium Oxide Resistive Memory Performance Through Low-Temperature Supercritical Oxidation Treatments

Effect of Ni3+ Concentration on the Resistive Switching Behaviors of Nio Memory Devices

Enhanced Resistive Switching Performance of Spinel MnCo2O4 Resistive Random Access Memory Devices: Effects of Annealing Temperatures and Annealing Atmospheres