Abstract:A 30~60 GHz broadband down-conversion mixer driven by low local oscillator (LO) power is presented. The down-conversion mixer utilizes an input signal coupling technique based on the Marchand balun to achieve broadband operation and achieves low LO power drive and low DC power consumption through the use of a weak inversion bias with Gilbert switching devices. The broadband conversion of single-ended to differential signals is achieved using the Marchand balun with compensation lines, and an equivalent circuit analysis is performed. For the intermediate frequency (IF) output, a self-biased IF trans-impedance amplifier with current reusing and an active IF balun structure are used to achieve signal amplification and single-ended signal output. Test results show that the proposed mixer achieves a conversion gain of -1.2 to 6.4 dB in an IF output bandwidth of 0.1 to 5 GHz at radio frequency (RF) input frequencies of 30 to 60 GHz and LO driving power of -10 dBm. The DC power consumption of the core mixing unit of the proposed mixer is 4.8 mW, and the DC power consumption including the IF amplifier is 28.3 mW. The proposed mixer uses a 65 nm CMOS technology with a chip area of 0.26 mm2.

A high gain, wide band (2–10 GHz), and low noise active balun merged folded mixer for the full-band UWB application

A group-selected and gain controllable CMOS active mixer for UWB applications

A UWB Mixer with a Balanced Wide Band Active Balun Using Crossing Centertaped Inductor

A Gm-boosted and current peaking wideband merged LNA and mixer

Design and Analysis of an Ultrawide-Band Distributed Drain-Pumped Mixer Using 0.18µm CMOS Technology

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

Compact CMOS Baluns for the 4–10 GHz Band Applications

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

0.9–10GHz low noise amplifier with capacitive cross coupling

A 0.13&#x03bc;m CMOS UWB Receiver Front-End Using Passive Mixer

A K-Band High-Gain and Low-Noise Folded CMOS Mixer Using Current-Reuse and Cross-Coupled Techniques

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

Design Of A 3-5-Ghz Ultrawideband Bifet Mixer Using 0.35-Mu M Sige Bicmos Technology

A fully-integrated low-power 3.1-10.6GHz UWB LNA in 0.18μm CMOS

A Single-in-differential-out CMOS RF Front-End for UWB 6&#x2013;9ghz Applications

A 5 GHz low power 0.18μm CMOS Gilbert cell mixer

A 30-60 GHz Broadband Low LO-Drive Down-Conversion Mixer with Active IF Balun in 65 nm CMOS Technology

A 10ghz 2.8db Gain Passive Mixer In 0.18um Cmos Technology

A Robust Cmos Rf Front-End Design for 3.1-4.8Ghz Mb-Ofdm Uwb System

Design of a 3–5‐ghz Ultrawideband BiFET Mixer Using 0.35‐μm SiGE BiCMOS Technology