Abstract:This article presents a novel fully differential four-path passive mixer first receiver architecture, offering a wide radio frequency (RF) bandwidth and improved out-of-band (OOB) rejection. The design utilizes a current reuse approach in the process voltage temperature (PVT) resistant complementary transimpedance amplifier (TIA) to achieve excellent noise performance while minimizing power consumption. Besides, the integration of a second-order Twin-T Elliptic Low-pass Notch filter (TTE-LPNF) followed by the TIA enhances the linearity performance of the receiver and helps achieve wideband response due to positive capacitive feedback and shunting notch. The active RC-based buffer circuit is designed to efficiently drive a 50 $\Omega$ load impedance while providing substantial bandwidth. Moreover, the paper proposed a novel clock generator architecture based on a passive polyphase filter (PPF) and digital combinational logic that has reduced the required input local oscillator (LO) frequency by half compared to the conventional architecture for the same LO output, therefore, reducing the clock power. As a proof of concept, the proposed receiver is fabricated in TSMC 180 nm CMOS technology, and measurement is performed in the lab at room temperature. The receiver demonstrates an impressive RF bandwidth of 200 MHz while operating smoothly within the frequency range of 0.5 -2.5 GHz. The proposed mixer first receiver has achieved a conversion gain of 29 dB, a noise figure (NF) of 5.8 dB at the LO frequency of 1 GHz, and an out-of-band third-order intercept point (OOB-IIP3) of $+$ 18.5 dBm with power dissipation of 27 mW in signal path and 34 mW in clock path while operating at 1.8 V.

A 10ghz 2.8db Gain Passive Mixer In 0.18um Cmos Technology

A Gm-boosted and current peaking wideband merged LNA and mixer

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A group-selected and gain controllable CMOS active mixer for UWB applications

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

A 0.1-1.9Ghz 65nm CMOS Variable-Gain Mixer-First Receiver with DSA and Noise-Shaping TIA.

Design and Analysis of an Ultrawide-Band Distributed Drain-Pumped Mixer Using 0.18µm CMOS Technology

A High Performance 2-Ghz Direct-Conversion Front End with Single-Ended RF Input in 0.13 Um CMOS

Design of a Low Power 60ghz OOK Receiver in 65nm CMOS Technology

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

A 30-60 GHz Broadband Low LO-Drive Down-Conversion Mixer with Active IF Balun in 65 nm CMOS Technology

A 0.18um 3.3mw Double-Balanced CMOS Active Mixer

A LOW POWER, HIGH-LINEARITY CMOS DOWNCONVERSION FOLDED MIXER FOR 2.4GHz ISM BAND APPLICATIONS

A 24‐ghz Active Up/down Bidirectional Mixer in 130‐nm RF CMOS

A K-Band High-Gain and Low-Noise Folded CMOS Mixer Using Current-Reuse and Cross-Coupled Techniques

A 5 GHz low power 0.18μm CMOS Gilbert cell mixer

A 900mhz High Linearity Low Power Down-Conversion Mixer

A Complementary Current-Mirror-Based Bulk-Driven Down-Conversion Mixer for Wideband Applications

A 24-to-30 GHz Ultra-High-Linearity Down-Conversion Mixer for 5G Applications Using a New Linearization Method

A 0.5–2.5 GHz Mixer First Receiver With 200 MHz RF Bandwidth and $+$18.5 dBm OB-IIP3 in 180 nm CMOS for 5G NR Band

A New Low Voltage RF CMOS Mixer Design