Abstract:This article presents a novel fully differential four-path passive mixer first receiver architecture, offering a wide radio frequency (RF) bandwidth and improved out-of-band (OOB) rejection. The design utilizes a current reuse approach in the process voltage temperature (PVT) resistant complementary transimpedance amplifier (TIA) to achieve excellent noise performance while minimizing power consumption. Besides, the integration of a second-order Twin-T Elliptic Low-pass Notch filter (TTE-LPNF) followed by the TIA enhances the linearity performance of the receiver and helps achieve wideband response due to positive capacitive feedback and shunting notch. The active RC-based buffer circuit is designed to efficiently drive a 50 $\Omega$ load impedance while providing substantial bandwidth. Moreover, the paper proposed a novel clock generator architecture based on a passive polyphase filter (PPF) and digital combinational logic that has reduced the required input local oscillator (LO) frequency by half compared to the conventional architecture for the same LO output, therefore, reducing the clock power. As a proof of concept, the proposed receiver is fabricated in TSMC 180 nm CMOS technology, and measurement is performed in the lab at room temperature. The receiver demonstrates an impressive RF bandwidth of 200 MHz while operating smoothly within the frequency range of 0.5 -2.5 GHz. The proposed mixer first receiver has achieved a conversion gain of 29 dB, a noise figure (NF) of 5.8 dB at the LO frequency of 1 GHz, and an out-of-band third-order intercept point (OOB-IIP3) of $+$ 18.5 dBm with power dissipation of 27 mW in signal path and 34 mW in clock path while operating at 1.8 V.

A 5 GHz low power 0.18μm CMOS Gilbert cell mixer

A group-selected and gain controllable CMOS active mixer for UWB applications

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A 0.1-1.9Ghz 65nm CMOS Variable-Gain Mixer-First Receiver with DSA and Noise-Shaping TIA.

A 0.18um 3.3mw Double-Balanced CMOS Active Mixer

Optimizing Mixer Noise Performance: A 2.4 Ghz Gilbert Downconversion Mixer for W-Cdma Application

A 2.4ghz Low Power Highly Linear Mixer For Direct-Conversion Receivers

2.4 GHz 0.35μm CMOS gilbert down-conversion mixer

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

A 0.18 Mu M Cmos High Linearity Flat Conversion Gain Down-Conversion Mixer For Uwb Receiver

A 0.18μm CMOS Gilbert low noise mixer with noise cancellation

A 0.18μm CMOS high linearity flat conversion gain down-conversion mixer for UWB receiver

A 0.18 Μm CMOS Gilbert Low Noise Mixer with Noise Cancellation

A High Performance Double-Balanced Gilbert Mixer with Active Loads for 2.4-GHz ISM Band Application

A 27.5–43.5 GHz High Linearity Up-Conversion CMOS Mixer for 5G Communication

A 0.18 μm mixer merged with LNA exploiting noise cancellation

A CMOS down-conversion micromixer for IEEE 802.11b WLAN transceivers

A 900mhz High Linearity Low Power Down-Conversion Mixer

A LOW POWER, HIGH-LINEARITY CMOS DOWNCONVERSION FOLDED MIXER FOR 2.4GHz ISM BAND APPLICATIONS

A 0.5–2.5 GHz Mixer First Receiver With 200 MHz RF Bandwidth and $+$18.5 dBm OB-IIP3 in 180 nm CMOS for 5G NR Band

Design of a high linearity low noise mixer for low voltage application