Abstract:The authors present a thorough analysis of the 1/f noise,linearity and conversion gain of a CMOS active double-balanced Gilbert mixer circuit.This mixer,adopting PMOSFETs as loads,is used for direct conversion receiver operating in the 2.4-GHz ISM band.To lower the 1/f noise of this mixer,the parasitic vertical NPN(V-NPN) BJT is used as switch,and the low noise shunt circuits paralleled with the PMOSFETs are adopted as loads.A high performance operational amplifier is also applied with the PMOSFETs,which not only provides a suitable DC bias voltage for the desired signals in the zero intermediate frequency(IF) band to avoid the saturation of the following stage,but also produces enough high conversion gain for the mixer.Meanwhile,the capacitor cross-coupled(CCC) circuits applied in the input transconductance(G m) stage allow further increasing the conversion gain.Besides,to enhance the linearity of the mixer,the common gate(CG) amplifiers as transconductance(G m) input stage devices are adopted.The mixer is fabricated with the TSMC 0.18-μm 1-Poly 6-Metal RF CMOS process.The resulting mixer achieves 17.78 dB conversion gain,13.24 dB NF and 4.45 dBm IIP3 with 3 mA current consumption under a 1.5 V power supply.

Low Voltage CMOS Gilbert Mixers for Bluetooth Transceiver

A 0.6V 32.5mw Highly Integrated Receiver for 2.4ghz ISM-Band Applications

20 . 6 A 0 . 6 V 32 . 5 mW Highly Integrated Receiver for 2 . 4 GHz ISM-Band Applications

A 5 GHz low power 0.18μm CMOS Gilbert cell mixer

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A group-selected and gain controllable CMOS active mixer for UWB applications

CMOS Mixers for 2.4GHz WLAN Transceivers

2.4 GHz 0.35μm CMOS gilbert down-conversion mixer

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

A LOW POWER, HIGH-LINEARITY CMOS DOWNCONVERSION FOLDED MIXER FOR 2.4GHz ISM BAND APPLICATIONS

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A New Low Voltage RF CMOS Mixer Design

A CMOS down-conversion micromixer for IEEE 802.11b WLAN transceivers

Analysis and Design of a Low-Voltage RF CMOS Mixer

Design of a high linearity low noise mixer for low voltage application

Low Voltage, Low Power, Downconversion Folded-Switching Mixer With Current-Reuse Technology

A CMOS Bluetooth Wireless Transmitter

A 0.18um 3.3mw Double-Balanced CMOS Active Mixer

A 3.3-V, 1.9-Ghz, High Linear CMOS Up-Mixer with Multi-tanh Linearization Technique

A High Performance Double-Balanced Gilbert Mixer with Active Loads for 2.4-GHz ISM Band Application