Abstract:The linearity of active mixers is usually determined by the input transistors, and many works have been proposed to improve it by modified input stages at the cost of a more complex structure or more power consumption. A new linearization method of active mixers is proposed in this paper; the input 1 dB compression point (IP1dB) and output 1 dB compression point (OP1dB) are greatly improved by exploiting the "reverse uplift" phenomenon. Compared with other linearization methods, the proposed one is simpler, more efficient, and sacrifices less conversion gain. Using this method, an ultra-high-linearity double-balanced down-conversion mixer with wide IF bandwidth is designed and fabricated in a 130 nm SiGe BiCMOS process. The proposed mixer includes a Gilbert-cell, a pair of phase-adjusting inductors, and a Marchand-balun-based output network. Under a 1.6 V supply voltage, the measurement results show that the mixer exhibits an excellent IP1dB of +7.2~+10.1 dBm, an average OP1dB of +5.4 dBm, which is the state-of-the-art linearity performance in mixers under a silicon-based process, whether active or passive. Moreover, a wide IF bandwidth of 8 GHz from 3 GHz to 11 GHz was achieved. The circuit consumes 19.8 mW and occupies 0.48 mm2, including all pads. The use of the "reverse uplift" allows us to implement high-linearity circuits more efficiently, which is helpful for the design of 5G high-speed communication transceivers.

A LOW POWER, HIGH-LINEARITY CMOS DOWNCONVERSION FOLDED MIXER FOR 2.4GHz ISM BAND APPLICATIONS

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A High Performance 2-Ghz Direct-Conversion Front End with Single-Ended RF Input in 0.13 Um CMOS

A compact dual-band direct-conversion CMOS transceiver for 802.11a/b/g WLAN

A group-selected and gain controllable CMOS active mixer for UWB applications

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

A K-Band High-Gain and Low-Noise Folded CMOS Mixer Using Current-Reuse and Cross-Coupled Techniques

Low Voltage, Low Power, Downconversion Folded-Switching Mixer With Current-Reuse Technology

Analysis and Design of a Low-Voltage RF CMOS Mixer

A New Low Voltage RF CMOS Mixer Design

A 900mhz High Linearity Low Power Down-Conversion Mixer

A High Performance Double-Balanced Gilbert Mixer with Active Loads for 2.4-GHz ISM Band Application

A CMOS down-conversion micromixer for IEEE 802.11b WLAN transceivers

A 1.9 GHz High Linearity CMOS Up-mixer

CMOS Mixers for 2.4GHz WLAN Transceivers

A 5 GHz low power 0.18μm CMOS Gilbert cell mixer

A 10ghz 2.8db Gain Passive Mixer In 0.18um Cmos Technology

An Implementation of a CMOS Down-Conversion Mixer for GSM1900 Receiver

A 30-60 GHz Broadband Low LO-Drive Down-Conversion Mixer with Active IF Balun in 65 nm CMOS Technology

A 24-to-30 GHz Ultra-High-Linearity Down-Conversion Mixer for 5G Applications Using a New Linearization Method