Abstract:Generalized broadband operation facilitates multifunction or multiband highly integrated applications, such as modern transceiver systems, where ultra-wideband bidirectional passive mixers are favored to avoid a complex up/down-conversion scheme. In this paper, a modified Ruthroff-type transmission line transformer (TLT) balun is presented to enhance the isolation of the mixer from the local oscillator (LO) to the radio frequency (RF). Compared to the conventional methods, the proposed Ruthroff-type architecture adopts a combination of shunt capacitors and parallel coupled lines to improve the return loss at the LO port, thus effectively avoiding the area consumption for the diode-to-balun impedance transformation while simultaneously providing a suitable point for IF extraction. In addition, a parallel compensation technique consisting of an inductor and resistor is applied to the RF balun to significantly improve the amplitude/phase balance performance over a wide bandwidth. Benefiting from the aforementioned operations, an isolation-enhanced 8–30 GHz passive double-balanced mixer is designed as a proof-of-principle demonstration via 0.15-micrometer GaAs p-HEMT technology. It exhibits ultra-broadband performance with 7 dB average conversion loss and 50 dB LO-to-RF isolation under 15 dBm LO power. The monolithic microwave integrated circuit area is 0.96 × 1.68 mm2 including all pads.

A UWB Mixer with a Balanced Wide Band Active Balun Using Crossing Centertaped Inductor

A group-selected and gain controllable CMOS active mixer for UWB applications

A high gain, wide band (2–10 GHz), and low noise active balun merged folded mixer for the full-band UWB application

Design and Analysis of an Ultrawide-Band Distributed Drain-Pumped Mixer Using 0.18µm CMOS Technology

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A Gm-boosted and current peaking wideband merged LNA and mixer

A 0.13&#x03bc;m CMOS UWB Receiver Front-End Using Passive Mixer

Compact CMOS Baluns for the 4–10 GHz Band Applications

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Design Of A 3-5-Ghz Ultrawideband Bifet Mixer Using 0.35-Mu M Sige Bicmos Technology

A 0.18um 3.3mw Double-Balanced CMOS Active Mixer

Design of a 3–5‐ghz Ultrawideband BiFET Mixer Using 0.35‐μm SiGE BiCMOS Technology

Design of a 3-5GHz BiFET mixer for ultra wideband application

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

A 5 GHz low power 0.18μm CMOS Gilbert cell mixer

A 30-60 GHz Broadband Low LO-Drive Down-Conversion Mixer with Active IF Balun in 65 nm CMOS Technology

Modified Broadband Ruthroff-Type Transmission Line Transformer Balun for Isolation-Enhanced Passive Mixer Design

A K-Band High-Gain and Low-Noise Folded CMOS Mixer Using Current-Reuse and Cross-Coupled Techniques

A Single-in-differential-out CMOS RF Front-End for UWB 6&#x2013;9ghz Applications