Abstract:In this study, by conducting cryogenic rolling (CR) followed by short-term annealing (CRA), we achieved the annealing-induced hardening in a single-phase FCC FeCoCrNiMo0.2 high-entropy alloy by introducing multiple heterostructures structures. Through this approach, the yield strength, ultimate tensile strength and tensile fracture elongation of CRA alloy were increased from 1116.8MPa to 1286.1MPa, 1363.2MPa to 1576.3MPa and 5.4% to 6.9%, respectively. Furthermore, a broader steady state of strain softening behavior was found in the CRA alloy, which is attributed to the additional strengthening and hardening effects resulting from high density of deformation nanotwins and phase transformations. Additionally, the research results show that the ultra-high strength and sufficient ductility of CRA alloy are attributed to the synergistic effect of multiple mechanisms, such as strengthening induced by heterogeneous microstructure of σ precipitate/HCP phase/FCC matrix phase, and high work hardening ability caused by the heterogeneity of high density deformation nanotwins, geometrically necessary dislocations (GND), stacking faults (SFs) and Lomer-Cottrell locks (L-C locks) nano-scale defects. This work provides useful insights for alloys that involves multiple heterogeneous microstructures strengthening and provides a promising approach for the design and manufacture of high-strength structural materials.

A Crossover from Hardening to Softening in Nanocrystalline Ni by Annealing and Rolling

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni

Anomalous Strain Rate Sensitivity of Nanocrystalline Ni Induced by Rolling Deformation

Rolling Deformation Induced Reduction of Rate Sensitivity and Enhancement of Hardness in Nanocrystalline NiFe Alloys

Significant annealing-induced hardening effect in nanolaminated-nanotwinned (CrCoNi)97.4Al0.8Ti1.8 medium-entropy alloy by severe cold rolling

Indentation Stress Relaxation Behavior in As-Deposited and Rolling Nanocrystalline NiFe

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

Effect of cross cold rolling and annealing on microstructure and texture in pure nickel

Effect of Annealing on Microstructure of a Ni-based Nano-grained Alloy

Annealing Behavior of Nanostructured Aluminum Produced by Cold Rolling to Ultrahigh Strains

Effects of Annealing on Microstructure and Mechanical Properties of Nano-Grained Ni-Based Alloy Produced by Severe Cold Rolling

Effects of cold-rolling and subsequent annealing on the nano-mechanical and creep behaviors of CrCoNi medium-entropy alloy

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Microstructure and Texture Evolution of Cu-Ni-P Alloy after Cold Rolling and Annealing

Microstructure and Mechanical Properties of Nano-Grained Dual-Phase Ni-Based Alloy

Annealing hardening in cryo-rolled high-entropy alloys by belated deformation twinning

Microstructure and Properties of Bulk Al0.5CoCrFeNi High-Entropy Alloy by Cold Rolling and Subsequent Annealing

Microstructure and Tensile Properties of Al0.5CoCrCuFeNi Alloys Produced by Simple Rolling and Annealing

Microstructure Evolution and Microhardness of AlxNi2−xCoCrFe Alloys After Long-Time Annealing

Annealing-induced Multi-Heterogeneous Microstructure Strengthening in FeCoCrNiMo0.2 High-Entropy Alloys

Grain Growth Mechanism of Lamellar-Structure High-Purity Nickel via Cold Rolling and Cryorolling during Annealing