Abstract:<p>Evolution of microstructure and texture in nanocrystalline (nc) face-centered cubic materials subjected to high-strain-rate compression are investigated. Three nc materials, differing in grain size or stacking fault energy, namely, 27 nm Ni, 70 nm Ni, and a 27 nm NiCo alloy are deformed under high strain rates (8000-23000 s<sup>−1</sup>) using the split-Hopkinson pressure bar technique. The transmission Kikuchi diffraction technique and discrete-crystal plasticity finite element (D-CPFE) simulations are used to evaluate the structural evolution. Experimental results show that grain growth and grain refinement occurred in samples with small and large initial grain sizes, respectively, while all deformed materials evolve to (110) texture. The D-CPFE simulations, built for grain size dependent nc deformation with no fitting parameters, reveal that partial dislocation slip induced faster texture evolution than full dislocation slip. Comparison between experimental and simulation results suggests that the (110) texture is mainly induced by combined full and partial dislocation slip in the 27 nm and 70 nm Ni samples, and by partial dislocation slip alone in the NiCo alloy. Deformation twinning made almost no contributions to the observed texture evolution. Grain-boundary-mediated deformation facilitates grain coarsening, while partial dislocation activities help to induce dynamic stabilization and further refinement of the nano-grains. The highly coupled evolution of microstructure and texture during dynamic deformation is mainly controlled by synergetic grain-size and strain-rate effects.</p>

Anomalous Strain Rate Sensitivity of Nanocrystalline Ni Induced by Rolling Deformation

Rolling Deformation Induced Reduction of Rate Sensitivity and Enhancement of Hardness in Nanocrystalline NiFe Alloys

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni

A Crossover from Hardening to Softening in Nanocrystalline Ni by Annealing and Rolling

The deformation mechanism of nanocrystalline nickel under high strain rate

Deformation Induced Internal Friction Peaks in Nanocrystalline Nickel

Indentation Stress Relaxation Behavior in As-Deposited and Rolling Nanocrystalline NiFe

Strain Rate Sensitivity and Activation Volume of Electrodeposited Nanocrystalline Ni and Ni-Co Alloys

Experimental And Modelling Investigations On Strain Rate Sensitivity Of An Electrodeposited 20nm Grain Sized Ni

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

Molecular dynamics study of the mechanical behavior of nickel nanowire: Strain rate effects

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Tensile-relaxation Behavior of Electrodeposited Nanocrystalline Ni

Grain size dependent microstructure and texture evolution during dynamic deformation of nanocrystalline face-centered cubic materials

Strain Rate Sensitivity Of Face-Centered-Cubic Nanocrystalline Materials Based On Dislocation Deformation

Size-Dependent Rate Sensitivity and Plasticity of Nanocrystalline Ru Films

Effects of Strain Rate, Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Effects of Strain on Recrystallization of Nickel Metals and Nanometals Produced by Heavy Cold Rolling

Deformation and adiabatic heating of single crystalline and nanocrystalline Ni micropillars at high strain rates

Temperature Effect on Nanotwinned Ni under Nanoindentation Using Molecular Dynamic Simulation