Abstract:Size effect of the nickel-based single crystal superalloy DD6 is investigated in this study by performing nanoindentation experiments and finite element (FE) simulations by emphasizing the strain rate effect. An analytical method is proposed to identify whether a material has the indentation size effect (ISE) based on incremental formulations of the indentation strain rate. By taking ISE as a critical factor, the contact area is further described by considering the curvature radius of non-ideal indenters due to wear issues in practice. In order to emphasize the strain rate effect during indentations, the material parameters dominating mechanical properties are adopted from the strain rate dependent Johnson–Cook model, particular for the nickel-based single crystal superalloy. Consequently, the dimensional ISE analysis is performed by proposing a theoretical framework to establish the relationship among the indentation strain rate, the indenter tip curvature radius and the applied load–penetration depth (P–h) curve for characterizing nanoindentation responses. By identifying the indenter curvature radii and loading time as the important external factors of hardness measurement, FE simulations are validated to achieve good agreement with experimental data. The validated FE predictions are reliably employed to calibrate the dimensionless model of hardness with different indenter curvature radii and loading rates. In the proposed form of the dimensional hardness model, it is found that the indenter curvature radius can be perfectly independent of the material constitutive properties and loading rates. It reveals the potential and advantageous determination of characteristic length of materials by using nanoindentation.

Experimental And Modelling Investigations On Strain Rate Sensitivity Of An Electrodeposited 20nm Grain Sized Ni

Strain Rate Sensitivity and Activation Volume of Electrodeposited Nanocrystalline Ni and Ni-Co Alloys

Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni

Tensile-relaxation Behavior of Electrodeposited Nanocrystalline Ni

Compressive Behavior of Nanocrystalline Nickel at Various Temperatures and Strain Rates

Anomalous Strain Rate Sensitivity of Nanocrystalline Ni Induced by Rolling Deformation

Enhanced Tensile Ductility in an Electrodeposited Nanocrystalline Ni

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni

A Computational Study On The Deformation Of Nanocrystalline Nickel

Solid Solution Effects on Hardness and Strain Rate Sensitivity of Nanocrystalline NiFe Alloy

Effects of Loading Strain Rate and Stacking Fault Energy on Nanoindentation Creep Behaviors of Nanocrystalline Cu, Ni-20 Wt.%fe and Ni

Temperature Effect on Nanotwinned Ni under Nanoindentation Using Molecular Dynamic Simulation

Thickness-Dependent Strain Rate Sensitivity of Nanolayers Via the Nanoindentation Technique

Compression Behavior of Nanocrystalline Nickel at 77 K

Strain Rate Sensitivity Of Face-Centered-Cubic Nanocrystalline Materials Based On Dislocation Deformation

Deformation Defects in Nanocrystalline Nickel

Large Lattice Strain In Individual Grains Of Deformed Nanocrystalline Ni

Indentation Size Effect in Electrodeposited Nickel with Different Grain Size and Crystal Orientation

Size effect of nickel-based single crystal superalloy revealed by nanoindentation with low strain rates

Bending deformation and indentation hardness of electrochemically deposited nanocrystalline nickel-iron alloys

Texture of Nanocrystalline Nickel: Probing the Lower Size Limit of Dislocation Activity