Abstract:The performance of the new generation aero-engine is strongly dependent on the application of integral blisk technologies, while the high-risk failure of integral disk joints severely restricts the promotion of those technologies. Therefore, the molecular dynamics method is used to investigate the influence of nanopores on the tensile properties of single crystal/polycrystalline Ni composites. The results show that the addition of single crystal nickel can increase the tensile strength of single crystal/polycrystalline Ni compared with polycrystalline nickel. The influence of pore position distribution on the tensile properties of single crystal/polycrystalline Ni is investigated. The simulation results show that nanopore defects in a single crystal region significantly aggravate the fracture at the single crystal/polycrystalline Ni interface. Pores not only penetrate the interface of composites but also rapidly expand inside the single crystal and the polycrystalline crystal, in which the interface of composites is further reduced resulting in the failure acceleration of single crystal/polycrystalline Ni composites. On the contrary, when the pores are in a polycrystalline region, the interface of single crystal/polycrystalline Ni hinders the amorphization of the polycrystalline nickel side and inhibits the pores from spreading toward the interface. When the pores are in the interface region, the pores do not continue to expand into the single crystal, but propagate inside the polycrystalline crystal. The effect of the porosity of interface pores on the tensile properties of single crystal/polycrystalline Ni is also discussed. It is found that the tensile strength of single crystal/polycrystalline Ni decreases rapidly when the void porosity exceeds 0.8%. Finally, the influence of the number of voids on the tensile properties while maintaining the porosity of the interface pores is analyzed. When the porosity of the prefabricated pores of the interface is kept constant at 0.8%, the larger the number of pores (i.e., the smaller the pores), the larger the elastic modulus. In the plastic deformation stage, due to the large number of dispersed small pore structures at the interface of the single crystal/polycrystalline Ni composites, the dislocation motion is hindered, which plays a certain strengthening role and improves the tensile strength of the single crystal/polycrystalline Ni composites. It can be concluded that single crystal/polycrystalline Ni with dispersed small pores has better tensile properties than those with large pores.

High P–T Nano-Mechanics of Polycrystalline Nickel

HighP-TNano-Mechanics of Polycrystalline Nickel.

Thermomechanics of nanocrystalline nickel under high pressure-temperature conditions.

A methodology for determining mechanical properties of nanomaterials at high pressure and temperature

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Compressive-tensile Deformation of Nanocrystalline Nickel at High Pressure and Temperature Conditions

Comparative Studies of Compressibility Between Nanocrystalline and Bulk Nickel

Texture of Nanocrystalline Nickel: Probing the Lower Size Limit of Dislocation Activity

Mechanical Properties of Micro-phases Along < 001 > Direction of Directionally Solidified Nickel-base Super-alloy by In-situ Nano-Indentation

Microstrain and grain-size analysis from diffraction peak width and graphical derivation of high-pressure thermomechanics

Tensile-relaxation Behavior of Electrodeposited Nanocrystalline Ni

Enhanced Tensile Ductility in an Electrodeposited Nanocrystalline Ni

High-pressure strengthening in ultrafine-grained metals

Nanoscale Origins of the Size Effect in the Compression Response of Single Crystal Ni-Base Superalloy Micro-Pillars

Bending deformation and indentation hardness of electrochemically deposited nanocrystalline nickel-iron alloys

Internal Friction Of Bend-Deformed Nanocrystalline Nickel By Mechanical Spectroscopy

Effect of Nanopores on Tensile Properties of Single Crystal/Polycrystalline Nickel Composites

Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility

Molecular Dynamics Simulations of the Tensile Mechanical Response of Single Crystal/Polycrystalline Nickel

Feasible evolution process of tensile property dominant effect factor in annealed high purity nickel by a combination of in situ tensile technique and EBSD

Neutron Diffraction Study on Strain Rate Dependent Mechanical Response in Superelastic NiTi Alloy: Bulk Structural Evolution and Constitutive Model