Abstract:It is well known that the shape memory effect of NiTi alloy is closely related to the micro-structural characteristics. Neutron diffraction method can used to explore the changes of the phase transformation, lattice strain and twining reorientation of bulk NiTi alloy during deformation caused by the applied stress. In this paper, combining the four types of deformation characteristics in the macro stress-strain curves of dual phase NiTi alloy and using in-situ neutron diffraction measurement, the micromechanical interactions and phase transformation are determined. The volume fraction of the initial austenite before deformation is about 22%. The contrast transformation, which is corresponding to the lattice strain rapid decreasing of (110)B2 and increasing of (002)B19', reveals that the stress-induced transformation from austenite to martensite phase appears with the volume fraction of austenite decreasing rapidly and 011 II type twinning increases at the low strain hardening stage. At the same time, the initial martensite grains change their orientation to a favorable direction and the new {201} type martensite twinnings induced with the increase of applied stress cannot recover after unloading. At the high strain hardening stage, the twinning deformation is considered to be the main mechanism from the observing of the changes in the full width at half maximum (FWHM). Meanwhile, the slipping caused by dislocation is the main deformation mechanism corresponding to the obvious increas of the FWHM at the statured stage of the strain hardening.

Internal Friction Of Bend-Deformed Nanocrystalline Nickel By Mechanical Spectroscopy

Revealing the Mechanical Bending Mechanisms of Single-Crystalline Rutile TiO2 Nanowires Near Room Temperature: Implications for Nanostructured Semiconductors

Deformation Induced Internal Friction Peaks in Nanocrystalline Nickel

Curie Transition of NC Nickel by Mechanical Spectroscopy and Magnetization Study

Multi-scale Deformation Behavior Investigation of 18cr–8ni Austenitic Steel Subjected to Low-Cycle Fatigue Loading

High P–T Nano-Mechanics of Polycrystalline Nickel

HighP-TNano-Mechanics of Polycrystalline Nickel.

Thermomechanics of nanocrystalline nickel under high pressure-temperature conditions.

Tensile-relaxation Behavior of Electrodeposited Nanocrystalline Ni

Compressive-tensile Deformation of Nanocrystalline Nickel at High Pressure and Temperature Conditions

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

Texture of Nanocrystalline Nickel: Probing the Lower Size Limit of Dislocation Activity

Thermally Activated Relaxation Processes in Superhard Nc-Tin/a-sin and Nc-(Tial)n/a-sin Nanocomposites Studied by Means of Internal Friction Measurements

Size-Dependent Curie Transition of Ni Nanocrystals

Contact and Friction at Nanoscale

Investigation of the high-temperature background of internal friction in a nitrided heat-resistant nickel-based alloy

Bending deformation and indentation hardness of electrochemically deposited nanocrystalline nickel-iron alloys

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni

Internal friction studies of nanocomposite superhard nc-TiN/a-Si3N4 and nc-(Ti1-xAlx)N/a-Si3N4 films

Molecular dynamics study of the mechanical behavior of nickel nanowire: Strain rate effects